<?xml version="1.0" encoding="UTF-8"?><rss version="2.0"
	xmlns:content="http://purl.org/rss/1.0/modules/content/"
	xmlns:wfw="http://wellformedweb.org/CommentAPI/"
	xmlns:dc="http://purl.org/dc/elements/1.1/"
	xmlns:atom="http://www.w3.org/2005/Atom"
	xmlns:sy="http://purl.org/rss/1.0/modules/syndication/"
	xmlns:slash="http://purl.org/rss/1.0/modules/slash/"
	>

<channel>
	<title>3D造形模型ネタ Archives | Tom Hirano Trains</title>
	<atom:link href="https://railroad.tomhirano.com/3d-printed-trains/feed/" rel="self" type="application/rss+xml" />
	<link>https://railroad.tomhirano.com/3d-printed-trains/</link>
	<description>Trains &#38; Model Trains</description>
	<lastBuildDate>Sat, 06 Sep 2025 06:17:15 +0000</lastBuildDate>
	<language>ja</language>
	<sy:updatePeriod>
	hourly	</sy:updatePeriod>
	<sy:updateFrequency>
	1	</sy:updateFrequency>
	<generator>https://wordpress.org/?v=7.1.5</generator>

<image>
	<url>https://railroad.tomhirano.com/wp-content/uploads/2017/09/cropped-tomh-image0-32x32.jpg</url>
	<title>3D造形模型ネタ Archives | Tom Hirano Trains</title>
	<link>https://railroad.tomhirano.com/3d-printed-trains/</link>
	<width>32</width>
	<height>32</height>
</image> 
	<item>
		<title>タイローダーの模型作りました</title>
		<link>https://railroad.tomhirano.com/3d-printed-trains/3d-tie-loader/</link>
		
		<dc:creator><![CDATA[トム]]></dc:creator>
		<pubDate>Thu, 11 Jul 2024 10:14:23 +0000</pubDate>
				<category><![CDATA[3D造形模型ネタ]]></category>
		<category><![CDATA[コンレール]]></category>
		<category><![CDATA[保線]]></category>
		<category><![CDATA[自作]]></category>
		<guid isPermaLink="false">https://railroad.tomhirano.com/?p=9060</guid>

					<description><![CDATA[<p>2019年末にMicro-trains 製の Conrail 保線ゴンドラ車＋タイローダーセット (993 01 880) を購入しました。 セットには、タイローダー（枕木用クレーン）の未塗装部品が付属していたのですが、 [&#8230;]</p>
<p>The post <a href="https://railroad.tomhirano.com/3d-printed-trains/3d-tie-loader/">タイローダーの模型作りました</a> appeared first on <a href="https://railroad.tomhirano.com">Tom Hirano Trains</a>.</p>
]]></description>
										<content:encoded><![CDATA[
<p class="wp-block-paragraph">2019年末にMicro-trains 製の <a href="https://railroad.tomhirano.com/n-scale/conrail/">Conrail</a> 保線ゴンドラ車＋タイローダーセット (993 01 880) を購入しました。 セットには、タイローダー（枕木用クレーン）の未塗装部品が付属していたのですが、なんとなく品質的に物足りず。 折角なので、付属品を参考に3Dプリンターで作ってみました。</p>



<h2 class="wp-block-heading">タイローダーの設計</h2>



<p class="wp-block-paragraph">基本的には、付属のタイローダーとほぼ同じ仕様で設計しました。 <a href="https://amzn.to/4eZiJGx">電子ノギス</a>でサイズを測りながら適当に立方体を積み重ねて作りました。</p>



<figure data-wp-context="{&quot;imageId&quot;:&quot;6afdf99920b08&quot;}" data-wp-interactive="core/image" data-wp-key="6afdf99920b08" class="wp-block-image size-medium wp-lightbox-container"><img fetchpriority="high" decoding="async" width="300" height="200" data-wp-class--hide="state.isContentHidden" data-wp-class--show="state.isContentVisible" data-wp-init="callbacks.setButtonStyles" data-wp-on--click="actions.showLightbox" data-wp-on--load="callbacks.setButtonStyles" data-wp-on--pointerdown="actions.preloadImage" data-wp-on--pointerenter="actions.preloadImageWithDelay" data-wp-on--pointerleave="actions.cancelPreload" data-wp-on-window--resize="callbacks.setButtonStyles" src="https://railroad.tomhirano.com/wp-content/uploads/2024/07/tie-loader-data-300x200.jpg" alt="タイローダーCADデータ" class="wp-image-9062" srcset="https://railroad.tomhirano.com/wp-content/uploads/2024/07/tie-loader-data-300x200.jpg 300w, https://railroad.tomhirano.com/wp-content/uploads/2024/07/tie-loader-data-1024x682.jpg 1024w, https://railroad.tomhirano.com/wp-content/uploads/2024/07/tie-loader-data-768x512.jpg 768w, https://railroad.tomhirano.com/wp-content/uploads/2024/07/tie-loader-data.jpg 1201w" sizes="(max-width: 300px) 100vw, 300px" /><button
			class="lightbox-trigger"
			type="button"
			aria-haspopup="dialog"
			data-wp-bind--aria-label="state.thisImage.triggerButtonAriaLabel"
			data-wp-init="callbacks.initTriggerButton"
			data-wp-on--click="actions.showLightbox"
			data-wp-style--right="state.thisImage.buttonRight"
			data-wp-style--top="state.thisImage.buttonTop"
		>
			<svg xmlns="http://www.w3.org/2000/svg" width="12" height="12" fill="none" viewBox="0 0 12 12">
				<path fill="#fff" d="M2 0a2 2 0 0 0-2 2v2h1.5V2a.5.5 0 0 1 .5-.5h2V0H2Zm2 10.5H2a.5.5 0 0 1-.5-.5V8H0v2a2 2 0 0 0 2 2h2v-1.5ZM8 12v-1.5h2a.5.5 0 0 0 .5-.5V8H12v2a2 2 0 0 1-2 2H8Zm2-12a2 2 0 0 1 2 2v2h-1.5V2a.5.5 0 0 0-.5-.5H8V0h2Z" />
			</svg>
		</button></figure>



<p class="wp-block-paragraph">唯一違う点は、運転席の窓の部分。　Micro-trains製は、黒いデカールで窓を誤魔化すタイプだったのですが、自分的にはここが納得いかず（笑）。 なので、窓部分をくり抜いたデザインにしました。 しかし、ぱっと見あまり変わりませんでした（笑）。</p>



<h2 class="wp-block-heading">即席だったけど</h2>



<p class="wp-block-paragraph">一晩で描いたタイローダーですが、意外といい感じに仕上がりました。 少し硬化が甘かったのか、クレーンを支えるレールが若干反れてしまったのが難点。 ただ、それ以外はおおむね良好でした。 ゴンドラがコンレールだったので、適当にコンレールデカールを作成してペタペタ。 意外と良いかも。</p>



<figure data-wp-context="{&quot;imageId&quot;:&quot;6afdf9992130b&quot;}" data-wp-interactive="core/image" data-wp-key="6afdf9992130b" class="wp-block-image size-medium wp-lightbox-container"><img decoding="async" width="300" height="200" data-wp-class--hide="state.isContentHidden" data-wp-class--show="state.isContentVisible" data-wp-init="callbacks.setButtonStyles" data-wp-on--click="actions.showLightbox" data-wp-on--load="callbacks.setButtonStyles" data-wp-on--pointerdown="actions.preloadImage" data-wp-on--pointerenter="actions.preloadImageWithDelay" data-wp-on--pointerleave="actions.cancelPreload" data-wp-on-window--resize="callbacks.setButtonStyles" src="https://railroad.tomhirano.com/wp-content/uploads/2024/07/loader-front-300x200.jpg" alt="タイローダー搭載例" class="wp-image-9064" srcset="https://railroad.tomhirano.com/wp-content/uploads/2024/07/loader-front-300x200.jpg 300w, https://railroad.tomhirano.com/wp-content/uploads/2024/07/loader-front-1024x682.jpg 1024w, https://railroad.tomhirano.com/wp-content/uploads/2024/07/loader-front-768x512.jpg 768w, https://railroad.tomhirano.com/wp-content/uploads/2024/07/loader-front.jpg 1201w" sizes="(max-width: 300px) 100vw, 300px" /><button
			class="lightbox-trigger"
			type="button"
			aria-haspopup="dialog"
			data-wp-bind--aria-label="state.thisImage.triggerButtonAriaLabel"
			data-wp-init="callbacks.initTriggerButton"
			data-wp-on--click="actions.showLightbox"
			data-wp-style--right="state.thisImage.buttonRight"
			data-wp-style--top="state.thisImage.buttonTop"
		>
			<svg xmlns="http://www.w3.org/2000/svg" width="12" height="12" fill="none" viewBox="0 0 12 12">
				<path fill="#fff" d="M2 0a2 2 0 0 0-2 2v2h1.5V2a.5.5 0 0 1 .5-.5h2V0H2Zm2 10.5H2a.5.5 0 0 1-.5-.5V8H0v2a2 2 0 0 0 2 2h2v-1.5ZM8 12v-1.5h2a.5.5 0 0 0 .5-.5V8H12v2a2 2 0 0 1-2 2H8Zm2-12a2 2 0 0 1 2 2v2h-1.5V2a.5.5 0 0 0-.5-.5H8V0h2Z" />
			</svg>
		</button></figure>



<figure data-wp-context="{&quot;imageId&quot;:&quot;6afdf99921994&quot;}" data-wp-interactive="core/image" data-wp-key="6afdf99921994" class="wp-block-image size-medium wp-lightbox-container"><img decoding="async" width="300" height="200" data-wp-class--hide="state.isContentHidden" data-wp-class--show="state.isContentVisible" data-wp-init="callbacks.setButtonStyles" data-wp-on--click="actions.showLightbox" data-wp-on--load="callbacks.setButtonStyles" data-wp-on--pointerdown="actions.preloadImage" data-wp-on--pointerenter="actions.preloadImageWithDelay" data-wp-on--pointerleave="actions.cancelPreload" data-wp-on-window--resize="callbacks.setButtonStyles" src="https://railroad.tomhirano.com/wp-content/uploads/2024/07/cr-67339-300x200.jpg" alt="後側" class="wp-image-9063" srcset="https://railroad.tomhirano.com/wp-content/uploads/2024/07/cr-67339-300x200.jpg 300w, https://railroad.tomhirano.com/wp-content/uploads/2024/07/cr-67339-1024x682.jpg 1024w, https://railroad.tomhirano.com/wp-content/uploads/2024/07/cr-67339-768x512.jpg 768w, https://railroad.tomhirano.com/wp-content/uploads/2024/07/cr-67339.jpg 1201w" sizes="(max-width: 300px) 100vw, 300px" /><button
			class="lightbox-trigger"
			type="button"
			aria-haspopup="dialog"
			data-wp-bind--aria-label="state.thisImage.triggerButtonAriaLabel"
			data-wp-init="callbacks.initTriggerButton"
			data-wp-on--click="actions.showLightbox"
			data-wp-style--right="state.thisImage.buttonRight"
			data-wp-style--top="state.thisImage.buttonTop"
		>
			<svg xmlns="http://www.w3.org/2000/svg" width="12" height="12" fill="none" viewBox="0 0 12 12">
				<path fill="#fff" d="M2 0a2 2 0 0 0-2 2v2h1.5V2a.5.5 0 0 1 .5-.5h2V0H2Zm2 10.5H2a.5.5 0 0 1-.5-.5V8H0v2a2 2 0 0 0 2 2h2v-1.5ZM8 12v-1.5h2a.5.5 0 0 0 .5-.5V8H12v2a2 2 0 0 1-2 2H8Zm2-12a2 2 0 0 1 2 2v2h-1.5V2a.5.5 0 0 0-.5-.5H8V0h2Z" />
			</svg>
		</button></figure>



<p class="wp-block-paragraph">クレーンだけ綺麗なのも微妙だけどまぁいいでしょう。 そのうち、もうちょっと丁寧に精細バージョン作ってみたいです。</p>



<p class="wp-block-paragraph">ではでは～</p>



<p class="wp-block-paragraph"></p>



<p class="wp-block-paragraph"></p>



<p class="wp-block-paragraph"></p>



<p class="wp-block-paragraph"></p>



<p class="wp-block-paragraph"></p>
<p>The post <a href="https://railroad.tomhirano.com/3d-printed-trains/3d-tie-loader/">タイローダーの模型作りました</a> appeared first on <a href="https://railroad.tomhirano.com">Tom Hirano Trains</a>.</p>
]]></content:encoded>
					
		
		
			</item>
		<item>
		<title>スノープラウ製作（Kato N P42DC用）</title>
		<link>https://railroad.tomhirano.com/3d-printed-trains/kato-p42dc-snowplow/</link>
		
		<dc:creator><![CDATA[トム]]></dc:creator>
		<pubDate>Sun, 02 Jun 2024 15:27:55 +0000</pubDate>
				<category><![CDATA[3D造形模型ネタ]]></category>
		<category><![CDATA[3Dプリンター]]></category>
		<category><![CDATA[N Scale]]></category>
		<category><![CDATA[カトー]]></category>
		<category><![CDATA[改造]]></category>
		<guid isPermaLink="false">https://railroad.tomhirano.com/?p=8822</guid>

					<description><![CDATA[<p>スノープラウが 前々から何となく気になっていたカトー製のスノープラウ。カプラーの制約であるのはわかるものの、何となくアイスクリームスプーンみたいなのが引っかかる（笑）。 自作して変えてカッコよくしたいなと思ったのが作るき [&#8230;]</p>
<p>The post <a href="https://railroad.tomhirano.com/3d-printed-trains/kato-p42dc-snowplow/">スノープラウ製作（Kato N P42DC用）</a> appeared first on <a href="https://railroad.tomhirano.com">Tom Hirano Trains</a>.</p>
]]></description>
										<content:encoded><![CDATA[
<h2 class="wp-block-heading">スノープラウが</h2>



<p class="wp-block-paragraph">前々から何となく気になっていたカトー製のスノープラウ。カプラーの制約であるのはわかるものの、何となくアイスクリームスプーンみたいなのが引っかかる（笑）。 自作して変えてカッコよくしたいなと思ったのが作るきっかけでした。</p>



<h2 class="wp-block-heading">3Dお絵描き</h2>



<p class="wp-block-paragraph">スノープラウは過去のプロジェクトでも書いたことがあったので、<a href="https://railroad.tomhirano.com/3d-printed-trains/p30ch-nscale-2020/">P30CH</a>で作ったものをちょっとアレンジ。P42DCに収まるサイズに調整しました。ホース／ケーブル類だけちょっと書き直し。こんな感じに。</p>



<figure data-wp-context="{&quot;imageId&quot;:&quot;6afdf99923bb3&quot;}" data-wp-interactive="core/image" data-wp-key="6afdf99923bb3" class="wp-block-image size-medium wp-lightbox-container"><img loading="lazy" decoding="async" width="300" height="200" data-wp-class--hide="state.isContentHidden" data-wp-class--show="state.isContentVisible" data-wp-init="callbacks.setButtonStyles" data-wp-on--click="actions.showLightbox" data-wp-on--load="callbacks.setButtonStyles" data-wp-on--pointerdown="actions.preloadImage" data-wp-on--pointerenter="actions.preloadImageWithDelay" data-wp-on--pointerleave="actions.cancelPreload" data-wp-on-window--resize="callbacks.setButtonStyles" src="https://railroad.tomhirano.com/wp-content/uploads/2024/06/snow-plow-300x200.jpg" alt="" class="wp-image-8825" srcset="https://railroad.tomhirano.com/wp-content/uploads/2024/06/snow-plow-300x200.jpg 300w, https://railroad.tomhirano.com/wp-content/uploads/2024/06/snow-plow-1024x682.jpg 1024w, https://railroad.tomhirano.com/wp-content/uploads/2024/06/snow-plow-768x512.jpg 768w, https://railroad.tomhirano.com/wp-content/uploads/2024/06/snow-plow-600x400.jpg 600w, https://railroad.tomhirano.com/wp-content/uploads/2024/06/snow-plow.jpg 1201w" sizes="(max-width: 300px) 100vw, 300px" /><button
			class="lightbox-trigger"
			type="button"
			aria-haspopup="dialog"
			data-wp-bind--aria-label="state.thisImage.triggerButtonAriaLabel"
			data-wp-init="callbacks.initTriggerButton"
			data-wp-on--click="actions.showLightbox"
			data-wp-style--right="state.thisImage.buttonRight"
			data-wp-style--top="state.thisImage.buttonTop"
		>
			<svg xmlns="http://www.w3.org/2000/svg" width="12" height="12" fill="none" viewBox="0 0 12 12">
				<path fill="#fff" d="M2 0a2 2 0 0 0-2 2v2h1.5V2a.5.5 0 0 1 .5-.5h2V0H2Zm2 10.5H2a.5.5 0 0 1-.5-.5V8H0v2a2 2 0 0 0 2 2h2v-1.5ZM8 12v-1.5h2a.5.5 0 0 0 .5-.5V8H12v2a2 2 0 0 1-2 2H8Zm2-12a2 2 0 0 1 2 2v2h-1.5V2a.5.5 0 0 0-.5-.5H8V0h2Z" />
			</svg>
		</button><figcaption class="wp-element-caption">上が純正、下が自作</figcaption></figure>



<h2 class="wp-block-heading">スノープラウ装着</h2>



<figure data-wp-context="{&quot;imageId&quot;:&quot;6afdf99924375&quot;}" data-wp-interactive="core/image" data-wp-key="6afdf99924375" class="wp-block-image size-medium wp-lightbox-container"><img loading="lazy" decoding="async" width="300" height="200" data-wp-class--hide="state.isContentHidden" data-wp-class--show="state.isContentVisible" data-wp-init="callbacks.setButtonStyles" data-wp-on--click="actions.showLightbox" data-wp-on--load="callbacks.setButtonStyles" data-wp-on--pointerdown="actions.preloadImage" data-wp-on--pointerenter="actions.preloadImageWithDelay" data-wp-on--pointerleave="actions.cancelPreload" data-wp-on-window--resize="callbacks.setButtonStyles" src="https://railroad.tomhirano.com/wp-content/uploads/2024/06/snowplow-comparison-300x200.jpg" alt="P42DC スノープラウ比較" class="wp-image-8823" srcset="https://railroad.tomhirano.com/wp-content/uploads/2024/06/snowplow-comparison-300x200.jpg 300w, https://railroad.tomhirano.com/wp-content/uploads/2024/06/snowplow-comparison-1024x682.jpg 1024w, https://railroad.tomhirano.com/wp-content/uploads/2024/06/snowplow-comparison-768x512.jpg 768w, https://railroad.tomhirano.com/wp-content/uploads/2024/06/snowplow-comparison-600x400.jpg 600w, https://railroad.tomhirano.com/wp-content/uploads/2024/06/snowplow-comparison.jpg 1201w" sizes="(max-width: 300px) 100vw, 300px" /><button
			class="lightbox-trigger"
			type="button"
			aria-haspopup="dialog"
			data-wp-bind--aria-label="state.thisImage.triggerButtonAriaLabel"
			data-wp-init="callbacks.initTriggerButton"
			data-wp-on--click="actions.showLightbox"
			data-wp-style--right="state.thisImage.buttonRight"
			data-wp-style--top="state.thisImage.buttonTop"
		>
			<svg xmlns="http://www.w3.org/2000/svg" width="12" height="12" fill="none" viewBox="0 0 12 12">
				<path fill="#fff" d="M2 0a2 2 0 0 0-2 2v2h1.5V2a.5.5 0 0 1 .5-.5h2V0H2Zm2 10.5H2a.5.5 0 0 1-.5-.5V8H0v2a2 2 0 0 0 2 2h2v-1.5ZM8 12v-1.5h2a.5.5 0 0 0 .5-.5V8H12v2a2 2 0 0 1-2 2H8Zm2-12a2 2 0 0 1 2 2v2h-1.5V2a.5.5 0 0 0-.5-.5H8V0h2Z" />
			</svg>
		</button><figcaption class="wp-element-caption">正面より</figcaption></figure>



<figure data-wp-context="{&quot;imageId&quot;:&quot;6afdf99924aef&quot;}" data-wp-interactive="core/image" data-wp-key="6afdf99924aef" class="wp-block-image size-medium wp-lightbox-container"><img loading="lazy" decoding="async" width="300" height="200" data-wp-class--hide="state.isContentHidden" data-wp-class--show="state.isContentVisible" data-wp-init="callbacks.setButtonStyles" data-wp-on--click="actions.showLightbox" data-wp-on--load="callbacks.setButtonStyles" data-wp-on--pointerdown="actions.preloadImage" data-wp-on--pointerenter="actions.preloadImageWithDelay" data-wp-on--pointerleave="actions.cancelPreload" data-wp-on-window--resize="callbacks.setButtonStyles" src="https://railroad.tomhirano.com/wp-content/uploads/2024/06/snowplow-replaced-300x200.jpg" alt="横からスノープラウ" class="wp-image-8824" srcset="https://railroad.tomhirano.com/wp-content/uploads/2024/06/snowplow-replaced-300x200.jpg 300w, https://railroad.tomhirano.com/wp-content/uploads/2024/06/snowplow-replaced-1024x682.jpg 1024w, https://railroad.tomhirano.com/wp-content/uploads/2024/06/snowplow-replaced-768x512.jpg 768w, https://railroad.tomhirano.com/wp-content/uploads/2024/06/snowplow-replaced-600x400.jpg 600w, https://railroad.tomhirano.com/wp-content/uploads/2024/06/snowplow-replaced.jpg 1201w" sizes="(max-width: 300px) 100vw, 300px" /><button
			class="lightbox-trigger"
			type="button"
			aria-haspopup="dialog"
			data-wp-bind--aria-label="state.thisImage.triggerButtonAriaLabel"
			data-wp-init="callbacks.initTriggerButton"
			data-wp-on--click="actions.showLightbox"
			data-wp-style--right="state.thisImage.buttonRight"
			data-wp-style--top="state.thisImage.buttonTop"
		>
			<svg xmlns="http://www.w3.org/2000/svg" width="12" height="12" fill="none" viewBox="0 0 12 12">
				<path fill="#fff" d="M2 0a2 2 0 0 0-2 2v2h1.5V2a.5.5 0 0 1 .5-.5h2V0H2Zm2 10.5H2a.5.5 0 0 1-.5-.5V8H0v2a2 2 0 0 0 2 2h2v-1.5ZM8 12v-1.5h2a.5.5 0 0 0 .5-.5V8H12v2a2 2 0 0 1-2 2H8Zm2-12a2 2 0 0 1 2 2v2h-1.5V2a.5.5 0 0 0-.5-.5H8V0h2Z" />
			</svg>
		</button><figcaption class="wp-element-caption">斜め前より</figcaption></figure>



<p class="wp-block-paragraph">適当に作った割には意外といい感じ（笑）。 実際の<a href="https://en.wikipedia.org/wiki/GE_Genesis">P42DC</a>は、ちゃんとスカート内にケーブル類を仕舞う事が多いんですが、まぁこうだらしない感じもたまには機械っぽくていいかも。</p>



<p class="wp-block-paragraph">暇見つけてもうちょっと改良してみましょう（笑）</p>



<p class="wp-block-paragraph">おしまい。</p>



<p class="wp-block-paragraph"></p>
<p>The post <a href="https://railroad.tomhirano.com/3d-printed-trains/kato-p42dc-snowplow/">スノープラウ製作（Kato N P42DC用）</a> appeared first on <a href="https://railroad.tomhirano.com">Tom Hirano Trains</a>.</p>
]]></content:encoded>
					
		
		
			</item>
		<item>
		<title>ABB ALP44 電気機関車 を作りました</title>
		<link>https://railroad.tomhirano.com/3d-printed-trains/alp44/</link>
		
		<dc:creator><![CDATA[トム]]></dc:creator>
		<pubDate>Sat, 07 Oct 2023 12:40:32 +0000</pubDate>
				<category><![CDATA[3D造形模型ネタ]]></category>
		<category><![CDATA[N Scale]]></category>
		<category><![CDATA[海外]]></category>
		<guid isPermaLink="false">https://railroad.tomhirano.com/?p=7887</guid>

					<description><![CDATA[<p>2～３年越しになってしまったけれど、ABB ALP44 電気機関車を3Dプリンタを用いて作ってみました。以前、シリコンコピーAEM-7を作った際に、動力や寸法等はある程度調査済みだったので比較的簡単でした。とはいえ、使っ [&#8230;]</p>
<p>The post <a href="https://railroad.tomhirano.com/3d-printed-trains/alp44/">ABB ALP44 電気機関車 を作りました</a> appeared first on <a href="https://railroad.tomhirano.com">Tom Hirano Trains</a>.</p>
]]></description>
										<content:encoded><![CDATA[
<p class="wp-block-paragraph">2～３年越しになってしまったけれど、<a href="https://global.abb/">ABB</a> ALP44 電気機関車を3Dプリンタを用いて作ってみました。以前、<a href="https://railroad.tomhirano.com/model-trains/silicone-aem7/">シリコンコピーAEM-7</a>を作った際に、動力や寸法等はある程度調査済みだったので比較的簡単でした。とはいえ、使っているソフトがアレなので、データ作りは苦戦しました（笑）</p>



<h2 class="wp-block-heading">なぜALP44なのか</h2>



<figure class="wp-block-image alignright size-medium"><img loading="lazy" decoding="async" width="300" height="200" src="https://railroad.tomhirano.com/wp-content/uploads/2023/10/NJ-Transit-ALP44-300x200.jpg" alt="NJ Transit ALP44" class="wp-image-7946" srcset="https://railroad.tomhirano.com/wp-content/uploads/2023/10/NJ-Transit-ALP44-300x200.jpg 300w, https://railroad.tomhirano.com/wp-content/uploads/2023/10/NJ-Transit-ALP44-600x399.jpg 600w, https://railroad.tomhirano.com/wp-content/uploads/2023/10/NJ-Transit-ALP44-768x511.jpg 768w, https://railroad.tomhirano.com/wp-content/uploads/2023/10/NJ-Transit-ALP44.jpg 900w" sizes="(max-width: 300px) 100vw, 300px" /></figure>



<p class="wp-block-paragraph">ALP44は、2回くらいしか見たことないので、正直あまりなじみはありません。 ただ、あまりにも運用期間が短かったため、供養も兼ねて（？）セレクトしました。 確かにAEM-7を作った方が使い道はあるでしょうが、ひねくれ者なので（笑） まぁ、ASEA AEM-7もそのうちやりたいとは思っています。</p>



<h2 class="wp-block-heading">ALP44の設計</h2>



<p class="wp-block-paragraph">ALP44の構造は、昔作ったシリコンコピーAEM-7と同じです。 足回りは、AEM-7同様にTomix ED75/ED79 (No.2122 / 2123)　を使用しました。 上に被せるボディシェルと台車レリーフの部分を3Dで設計しました。</p>



<figure class="wp-block-image size-medium"><a href="https://railroad.tomhirano.com/wp-content/uploads/2023/10/ALP44-body-data.jpg"><img loading="lazy" decoding="async" width="300" height="200" src="https://railroad.tomhirano.com/wp-content/uploads/2023/10/ALP44-body-data-300x200.jpg" alt="" class="wp-image-7944" srcset="https://railroad.tomhirano.com/wp-content/uploads/2023/10/ALP44-body-data-300x200.jpg 300w, https://railroad.tomhirano.com/wp-content/uploads/2023/10/ALP44-body-data-600x400.jpg 600w, https://railroad.tomhirano.com/wp-content/uploads/2023/10/ALP44-body-data-768x511.jpg 768w, https://railroad.tomhirano.com/wp-content/uploads/2023/10/ALP44-body-data.jpg 901w" sizes="(max-width: 300px) 100vw, 300px" /></a><figcaption class="wp-element-caption">ボディーシェルのデータ</figcaption></figure>



<figure class="wp-block-image size-medium"><a href="https://railroad.tomhirano.com/wp-content/uploads/2023/10/alp44-truck-data.jpg"><img loading="lazy" decoding="async" width="300" height="200" src="https://railroad.tomhirano.com/wp-content/uploads/2023/10/alp44-truck-data-300x200.jpg" alt="" class="wp-image-7945" srcset="https://railroad.tomhirano.com/wp-content/uploads/2023/10/alp44-truck-data-300x200.jpg 300w, https://railroad.tomhirano.com/wp-content/uploads/2023/10/alp44-truck-data-600x400.jpg 600w, https://railroad.tomhirano.com/wp-content/uploads/2023/10/alp44-truck-data-768x512.jpg 768w, https://railroad.tomhirano.com/wp-content/uploads/2023/10/alp44-truck-data.jpg 900w" sizes="(max-width: 300px) 100vw, 300px" /></a><figcaption class="wp-element-caption">台車レリーフはDT129に嵌る設計</figcaption></figure>



<p class="wp-block-paragraph">本当は、この2点で済ませるつもりでしたが、結局、色々追加しました。 床下を作ったり、塗装のため別パーツにしたりと。 屋根上のエアコンユニットも2種類こしらえてみました。</p>



<h2 class="wp-block-heading">とりあえず塗装</h2>



<p class="wp-block-paragraph">ALP44完成、と言いたいところですが、細部がまだ思うような形になってないので、試し塗りみたいな感じです（笑） とりあえず、ALP44を採用した2社の塗装を再現してみました。</p>



<h3 class="wp-block-heading">NJTransit（<a href="https://ja.wikipedia.org/wiki/%E3%83%8B%E3%83%A5%E3%83%BC%E3%82%B8%E3%83%A3%E3%83%BC%E3%82%B8%E3%83%BC%E3%83%BB%E3%83%88%E3%83%A9%E3%83%B3%E3%82%B8%E3%83%83%E3%83%88">ニュージャージートランジット</a>）</h3>



<figure class="wp-block-image size-medium"><a href="https://railroad.tomhirano.com/wp-content/uploads/2023/10/alp44m-njt.jpg"><img loading="lazy" decoding="async" width="300" height="200" src="https://railroad.tomhirano.com/wp-content/uploads/2023/10/alp44m-njt-300x200.jpg" alt="ALP44M NJT 4424" class="wp-image-7972" srcset="https://railroad.tomhirano.com/wp-content/uploads/2023/10/alp44m-njt-300x200.jpg 300w, https://railroad.tomhirano.com/wp-content/uploads/2023/10/alp44m-njt-600x400.jpg 600w, https://railroad.tomhirano.com/wp-content/uploads/2023/10/alp44m-njt-1024x682.jpg 1024w, https://railroad.tomhirano.com/wp-content/uploads/2023/10/alp44m-njt-768x512.jpg 768w, https://railroad.tomhirano.com/wp-content/uploads/2023/10/alp44m-njt.jpg 1201w" sizes="(max-width: 300px) 100vw, 300px" /></a></figure>



<p class="wp-block-paragraph">作りたかったやつ。 実は、ALP44には2種類あって、4400-4419号機がALP44。4420-4431号機は正確にはALP44Mです^^ </p>



<h3 class="wp-block-heading">SEPTA（<a href="https://ja.wikipedia.org/wiki/%E5%8D%97%E6%9D%B1%E3%83%9A%E3%83%B3%E3%82%B7%E3%83%AB%E3%83%99%E3%83%8B%E3%82%A2%E4%BA%A4%E9%80%9A%E5%B1%80">南東ペンシルベニア交通局</a>）</h3>



<figure class="wp-block-image size-medium"><a href="https://railroad.tomhirano.com/wp-content/uploads/2023/10/alp44m-septa.jpg"><img loading="lazy" decoding="async" width="300" height="200" src="https://railroad.tomhirano.com/wp-content/uploads/2023/10/alp44m-septa-300x200.jpg" alt="ALP44 SEPTA 2308" class="wp-image-7971" srcset="https://railroad.tomhirano.com/wp-content/uploads/2023/10/alp44m-septa-300x200.jpg 300w, https://railroad.tomhirano.com/wp-content/uploads/2023/10/alp44m-septa-600x400.jpg 600w, https://railroad.tomhirano.com/wp-content/uploads/2023/10/alp44m-septa-1024x682.jpg 1024w, https://railroad.tomhirano.com/wp-content/uploads/2023/10/alp44m-septa-768x512.jpg 768w, https://railroad.tomhirano.com/wp-content/uploads/2023/10/alp44m-septa.jpg 1201w" sizes="(max-width: 300px) 100vw, 300px" /></a></figure>



<p class="wp-block-paragraph">厳密にいうと、SEPTAのは側面ルーバー部分が異なります。窓の開閉も違うようです。まぁそのうちちゃんとしたのを作るかも（笑）</p>



<p class="wp-block-paragraph">エアコンはこんな感じに作り分けしました。 かなり適当ですが（笑）</p>



<figure class="wp-block-image size-medium"><a href="https://railroad.tomhirano.com/wp-content/uploads/2023/10/alp44-roof.jpg"><img loading="lazy" decoding="async" width="300" height="225" src="https://railroad.tomhirano.com/wp-content/uploads/2023/10/alp44-roof-300x225.jpg" alt="alp44-roof" class="wp-image-7973" srcset="https://railroad.tomhirano.com/wp-content/uploads/2023/10/alp44-roof-300x225.jpg 300w, https://railroad.tomhirano.com/wp-content/uploads/2023/10/alp44-roof-600x450.jpg 600w, https://railroad.tomhirano.com/wp-content/uploads/2023/10/alp44-roof-1024x768.jpg 1024w, https://railroad.tomhirano.com/wp-content/uploads/2023/10/alp44-roof-768x576.jpg 768w, https://railroad.tomhirano.com/wp-content/uploads/2023/10/alp44-roof.jpg 1200w" sizes="(max-width: 300px) 100vw, 300px" /></a></figure>



<h2 class="wp-block-heading">ALP44工作の今後</h2>



<p class="wp-block-paragraph">今回は、昔作ったAEM-7の動力を流用したのでTOMIXでしたが、この動力はフランジが高いのが難点です。そう、アトラスのCode55では走行できないのです。また、自室はCode65ですが、こちらも切替ポイント通過の際、フロッグに少し乗り上げるため、ユラユラしてしまいます。DCCに関しても、載せるスペースがないので、そのうち別の動力で再挑戦したいと思っています。</p>
<p>The post <a href="https://railroad.tomhirano.com/3d-printed-trains/alp44/">ABB ALP44 電気機関車 を作りました</a> appeared first on <a href="https://railroad.tomhirano.com">Tom Hirano Trains</a>.</p>
]]></content:encoded>
					
		
		
			</item>
		<item>
		<title>Delaware &#038; Hudson 木造カブースの製作</title>
		<link>https://railroad.tomhirano.com/3d-printed-trains/delaware-hudson-wooden-caboose/</link>
		
		<dc:creator><![CDATA[トム]]></dc:creator>
		<pubDate>Thu, 20 Jul 2023 11:49:53 +0000</pubDate>
				<category><![CDATA[3D造形模型ネタ]]></category>
		<category><![CDATA[N Scale]]></category>
		<category><![CDATA[鉄道模型]]></category>
		<guid isPermaLink="false">https://railroad.tomhirano.com/?p=7394</guid>

					<description><![CDATA[<p>製作のきっかけ 小型機関車に似合いそうな短めの木造カブース（車掌車）をネット検索していたところ、アメリカ Delaware &#38; Hudson 鉄道(D&#38;H) D&#38;H 35886の保存車の画像にたど [&#8230;]</p>
<p>The post <a href="https://railroad.tomhirano.com/3d-printed-trains/delaware-hudson-wooden-caboose/">Delaware &#038; Hudson 木造カブースの製作</a> appeared first on <a href="https://railroad.tomhirano.com">Tom Hirano Trains</a>.</p>
]]></description>
										<content:encoded><![CDATA[
<h2 class="wp-block-heading">製作のきっかけ</h2>



<p class="wp-block-paragraph">小型機関車に似合いそうな短めの木造カブース（車掌車）をネット検索していたところ、アメリカ Delaware &amp; Hudson 鉄道(D&amp;H)  <a href="https://whippanyrailwaymuseum.net/equipment/dh-35886/">D&amp;H 35886</a>の保存車の画像にたどり着きました。 元々はフリーランス塗装の種車に使うつもりでモデリングしましたが、折角なので保存車の仕様を時間が許す限り再現してみました。</p>



<p class="wp-block-paragraph">今回参考にした Delaware &amp; Hudson の木製カブースは1913年製で、デラウェアハドソン鉄道が初めて導入した4軸車掌車の一つでした。 キュポラ部分が車端に寄っているのと、補強の鉄材が斜めに入っているのが特徴です。 この35886号車は、ニュージャージー州にある <a href="https://whippanyrailwaymuseum.net/">Whippany Railway Museum</a> で展示されています。 この木造カブースシリーズ、キュポラなしバージョンがあったり、銅板に張り替えられたカブースなど、現役時代は様々なバリエーションがあったようです。 </p>



<h2 class="wp-block-heading">木造カブースのモデリング</h2>



<p class="wp-block-paragraph">過去に作った<a href="https://railroad.tomhirano.com/3d-printed-trains/n8-caboose/">N8カブース</a>のデータを基に、長さを調整、窓を開け直して、キュポラ部分を新たに作りました。  このカブースは蒸気機関車時代のデビューなので、ブレーキハンドルが水平だったり、窓上に山形の雨除けがあったりと今まで作った事のない形状が楽しめました。 </p>



<p class="wp-block-paragraph">木造感を出すのは、スリットを入れるだけで大丈夫そうです。 スリットを消せば銅板仕様にもなり、一つの労力で2度楽しめて、大変お得です（笑）　フリーランスの方は時代を考慮して銅板仕様にするつもりです。</p>



<figure class="wp-block-image size-medium"><img loading="lazy" decoding="async" width="300" height="225" src="https://railroad.tomhirano.com/wp-content/uploads/2023/07/wooden-caboose-drawing-300x225.jpg" alt="D&amp;H Wooden caboose" class="wp-image-7402" srcset="https://railroad.tomhirano.com/wp-content/uploads/2023/07/wooden-caboose-drawing-300x225.jpg 300w, https://railroad.tomhirano.com/wp-content/uploads/2023/07/wooden-caboose-drawing-600x449.jpg 600w, https://railroad.tomhirano.com/wp-content/uploads/2023/07/wooden-caboose-drawing-1024x767.jpg 1024w, https://railroad.tomhirano.com/wp-content/uploads/2023/07/wooden-caboose-drawing-768x575.jpg 768w, https://railroad.tomhirano.com/wp-content/uploads/2023/07/wooden-caboose-drawing.jpg 1194w" sizes="(max-width: 300px) 100vw, 300px" /></figure>



<h2 class="wp-block-heading">カブースの塗装</h2>



<p class="wp-block-paragraph">現役時代の実車は、恐らくタスカンレッド寄りかと思いますが、保存車は結構綺麗な赤。 なので、今回は余りものスプレーのタミヤ・イタリアンレッドにしました（笑） そして、屋根等は クレオス 黒色サフで誤魔化し、手すり等の部分は余っていたタミヤ・キャラメルイエローにしました。 いつもの事ですが、デカールはアルプスMD1500で出した即席自作デカールです。</p>



<figure class="wp-block-image size-medium"><img loading="lazy" decoding="async" width="300" height="225" src="https://railroad.tomhirano.com/wp-content/uploads/2023/07/dh-35886-front-300x225.jpg" alt="木造カブース" class="wp-image-7400" srcset="https://railroad.tomhirano.com/wp-content/uploads/2023/07/dh-35886-front-300x225.jpg 300w, https://railroad.tomhirano.com/wp-content/uploads/2023/07/dh-35886-front-600x450.jpg 600w, https://railroad.tomhirano.com/wp-content/uploads/2023/07/dh-35886-front-1024x768.jpg 1024w, https://railroad.tomhirano.com/wp-content/uploads/2023/07/dh-35886-front-768x576.jpg 768w, https://railroad.tomhirano.com/wp-content/uploads/2023/07/dh-35886-front.jpg 1067w" sizes="(max-width: 300px) 100vw, 300px" /></figure>



<figure class="wp-block-image size-medium"><img loading="lazy" decoding="async" width="300" height="225" src="https://railroad.tomhirano.com/wp-content/uploads/2023/07/dh-35886-rear-300x225.jpg" alt="d&amp;h 35886" class="wp-image-7401" srcset="https://railroad.tomhirano.com/wp-content/uploads/2023/07/dh-35886-rear-300x225.jpg 300w, https://railroad.tomhirano.com/wp-content/uploads/2023/07/dh-35886-rear-600x450.jpg 600w, https://railroad.tomhirano.com/wp-content/uploads/2023/07/dh-35886-rear-1024x768.jpg 1024w, https://railroad.tomhirano.com/wp-content/uploads/2023/07/dh-35886-rear-768x576.jpg 768w, https://railroad.tomhirano.com/wp-content/uploads/2023/07/dh-35886-rear.jpg 1067w" sizes="(max-width: 300px) 100vw, 300px" /></figure>



<p class="wp-block-paragraph">このほかにも、2パターン作成中ですので、完成次第ここに画像を追加しようかと思っています。 いつになるかわかりませんが（笑） おしまい。</p>



<p class="wp-block-paragraph">＜2023/8/30追記＞</p>



<figure class="wp-block-image size-medium"><a href="https://railroad.tomhirano.com/wp-content/uploads/2023/08/dh35886.jpg"><img loading="lazy" decoding="async" width="300" height="225" src="https://railroad.tomhirano.com/wp-content/uploads/2023/08/dh35886-300x225.jpg" alt="d&amp;H 35889" class="wp-image-7732" srcset="https://railroad.tomhirano.com/wp-content/uploads/2023/08/dh35886-300x225.jpg 300w, https://railroad.tomhirano.com/wp-content/uploads/2023/08/dh35886-600x450.jpg 600w, https://railroad.tomhirano.com/wp-content/uploads/2023/08/dh35886-1024x768.jpg 1024w, https://railroad.tomhirano.com/wp-content/uploads/2023/08/dh35886-768x576.jpg 768w, https://railroad.tomhirano.com/wp-content/uploads/2023/08/dh35886.jpg 1067w" sizes="(max-width: 300px) 100vw, 300px" /></a><figcaption class="wp-element-caption">両端にゼブラを追加しました</figcaption></figure>



<figure class="wp-block-image size-medium"><a href="https://railroad.tomhirano.com/wp-content/uploads/2023/08/dh-35849R.jpg"><img loading="lazy" decoding="async" width="300" height="225" src="https://railroad.tomhirano.com/wp-content/uploads/2023/08/dh-35849R-300x225.jpg" alt="D&amp;H 35849R" class="wp-image-7733" srcset="https://railroad.tomhirano.com/wp-content/uploads/2023/08/dh-35849R-300x225.jpg 300w, https://railroad.tomhirano.com/wp-content/uploads/2023/08/dh-35849R-600x450.jpg 600w, https://railroad.tomhirano.com/wp-content/uploads/2023/08/dh-35849R-1024x768.jpg 1024w, https://railroad.tomhirano.com/wp-content/uploads/2023/08/dh-35849R-768x576.jpg 768w, https://railroad.tomhirano.com/wp-content/uploads/2023/08/dh-35849R.jpg 1067w" sizes="(max-width: 300px) 100vw, 300px" /></a><figcaption class="wp-element-caption">カブース銅板仕様も。塗装かなり雑だった（笑）</figcaption></figure>



<figure class="wp-block-image size-medium"><a href="https://railroad.tomhirano.com/wp-content/uploads/2023/08/caboose-ends.jpg"><img loading="lazy" decoding="async" width="300" height="225" src="https://railroad.tomhirano.com/wp-content/uploads/2023/08/caboose-ends-300x225.jpg" alt="D&amp;H Caboose" class="wp-image-7734" srcset="https://railroad.tomhirano.com/wp-content/uploads/2023/08/caboose-ends-300x225.jpg 300w, https://railroad.tomhirano.com/wp-content/uploads/2023/08/caboose-ends-600x449.jpg 600w, https://railroad.tomhirano.com/wp-content/uploads/2023/08/caboose-ends-1024x767.jpg 1024w, https://railroad.tomhirano.com/wp-content/uploads/2023/08/caboose-ends-768x575.jpg 768w, https://railroad.tomhirano.com/wp-content/uploads/2023/08/caboose-ends.jpg 1068w" sizes="(max-width: 300px) 100vw, 300px" /></a><figcaption class="wp-element-caption">ゼブラ追加後のエンド部。良い感じ。</figcaption></figure>
<p>The post <a href="https://railroad.tomhirano.com/3d-printed-trains/delaware-hudson-wooden-caboose/">Delaware &#038; Hudson 木造カブースの製作</a> appeared first on <a href="https://railroad.tomhirano.com">Tom Hirano Trains</a>.</p>
]]></content:encoded>
					
		
		
			</item>
		<item>
		<title>ノス鉄サイズ EMD SW型ディーゼル機関車の製作</title>
		<link>https://railroad.tomhirano.com/3d-printed-trains/emd-sw-switcher/</link>
		
		<dc:creator><![CDATA[トム]]></dc:creator>
		<pubDate>Sat, 08 Jul 2023 15:33:29 +0000</pubDate>
				<category><![CDATA[3D造形模型ネタ]]></category>
		<category><![CDATA[N Scale]]></category>
		<category><![CDATA[海外]]></category>
		<guid isPermaLink="false">https://railroad.tomhirano.com/?p=7366</guid>

					<description><![CDATA[<p>トミーテックノスタルジック鉄道コレクションの動力ユニット TM-TR07 がなかなか良いという噂を聞いたので、思い付きでEMD SW型 ディーゼル機関車を作ってみました。 このディーゼル機関車は、アメリカのEMD (El [&#8230;]</p>
<p>The post <a href="https://railroad.tomhirano.com/3d-printed-trains/emd-sw-switcher/">ノス鉄サイズ EMD SW型ディーゼル機関車の製作</a> appeared first on <a href="https://railroad.tomhirano.com">Tom Hirano Trains</a>.</p>
]]></description>
										<content:encoded><![CDATA[
<p class="wp-block-paragraph">トミーテック<a href="https://diocolle.tomytec.co.jp/lineup/nostalgic/">ノスタルジック鉄道コレクション</a>の動力ユニット <a href="https://amzn.to/3XOuIPi">TM-TR07</a> がなかなか良いという噂を聞いたので、思い付きでEMD SW型 ディーゼル機関車を作ってみました。 このディーゼル機関車は、アメリカのEMD (Electro-motive Division）製で、戦後ポピュラーだった入換機です。 その入換機で代表的な顔を２パターン、ノス鉄サイズに縮めて描いてみました。</p>



<h2 class="wp-block-heading">データ作り</h2>



<p class="wp-block-paragraph">今回の EMD SWは、何となく書き始めてしまった上に「タイプ」なので、きちんとリサーチしていません（笑） 過去の記憶とネットの画像を照らし合わせながら、それっぽく仕上げてみました。</p>



<h3 class="wp-block-heading">EMD SWシリーズ タイプA</h3>



<figure class="wp-block-image size-medium"><a href="https://railroad.tomhirano.com/wp-content/uploads/2023/07/emd-sw-front.jpg"><img loading="lazy" decoding="async" width="300" height="200" src="https://railroad.tomhirano.com/wp-content/uploads/2023/07/emd-sw-front-300x200.jpg" alt="EMD SW 前" class="wp-image-7376" srcset="https://railroad.tomhirano.com/wp-content/uploads/2023/07/emd-sw-front-300x200.jpg 300w, https://railroad.tomhirano.com/wp-content/uploads/2023/07/emd-sw-front-600x400.jpg 600w, https://railroad.tomhirano.com/wp-content/uploads/2023/07/emd-sw-front-768x511.jpg 768w, https://railroad.tomhirano.com/wp-content/uploads/2023/07/emd-sw-front.jpg 901w" sizes="(max-width: 300px) 100vw, 300px" /></a></figure>



<figure class="wp-block-image size-medium"><a href="https://railroad.tomhirano.com/wp-content/uploads/2023/07/emd-sw-rear.jpg"><img loading="lazy" decoding="async" width="300" height="200" src="https://railroad.tomhirano.com/wp-content/uploads/2023/07/emd-sw-rear-300x200.jpg" alt="EMD SW 後" class="wp-image-7377" srcset="https://railroad.tomhirano.com/wp-content/uploads/2023/07/emd-sw-rear-300x200.jpg 300w, https://railroad.tomhirano.com/wp-content/uploads/2023/07/emd-sw-rear-600x400.jpg 600w, https://railroad.tomhirano.com/wp-content/uploads/2023/07/emd-sw-rear-768x512.jpg 768w, https://railroad.tomhirano.com/wp-content/uploads/2023/07/emd-sw-rear.jpg 900w" sizes="(max-width: 300px) 100vw, 300px" /></a></figure>



<p class="wp-block-paragraph">個人的にはよく見かけたタイプで、アメリカに居た頃は<a href="https://railroad.tomhirano.com/railroad/nj-transit/">NJ Transit</a> でも入換機として活躍していました。ナンバー一体型のライト、キャブの屋根の丸み、キャブ手前のボディの窄みを意識して模型化してみました。</p>



<h3 class="wp-block-heading">EMD SWシリーズ タイプB (SW1000風)</h3>



<figure class="wp-block-image size-medium"><a href="https://railroad.tomhirano.com/wp-content/uploads/2023/07/emd-nw-front.jpg"><img loading="lazy" decoding="async" width="300" height="200" src="https://railroad.tomhirano.com/wp-content/uploads/2023/07/emd-nw-front-300x200.jpg" alt="EMD SW1000 前" class="wp-image-7374" srcset="https://railroad.tomhirano.com/wp-content/uploads/2023/07/emd-nw-front-300x200.jpg 300w, https://railroad.tomhirano.com/wp-content/uploads/2023/07/emd-nw-front-600x400.jpg 600w, https://railroad.tomhirano.com/wp-content/uploads/2023/07/emd-nw-front-768x512.jpg 768w, https://railroad.tomhirano.com/wp-content/uploads/2023/07/emd-nw-front.jpg 900w" sizes="(max-width: 300px) 100vw, 300px" /></a></figure>



<figure class="wp-block-image size-medium"><a href="https://railroad.tomhirano.com/wp-content/uploads/2023/07/emd-nw-rear.jpg"><img loading="lazy" decoding="async" width="300" height="200" src="https://railroad.tomhirano.com/wp-content/uploads/2023/07/emd-nw-rear-300x200.jpg" alt="EMD SW1000 後" class="wp-image-7375" srcset="https://railroad.tomhirano.com/wp-content/uploads/2023/07/emd-nw-rear-300x200.jpg 300w, https://railroad.tomhirano.com/wp-content/uploads/2023/07/emd-nw-rear-600x400.jpg 600w, https://railroad.tomhirano.com/wp-content/uploads/2023/07/emd-nw-rear-768x511.jpg 768w, https://railroad.tomhirano.com/wp-content/uploads/2023/07/emd-nw-rear.jpg 901w" sizes="(max-width: 300px) 100vw, 300px" /></a></figure>



<p class="wp-block-paragraph">タイプA を少しモダンにしたような雰囲気で、今でもMP15等で似たようなデザインが見受けられます。タイプAとの変化をつけるために、高めのフードとキャブが特徴のスタイルを取り入れてみました。</p>



<h2 class="wp-block-heading">造形・組立</h2>



<p class="wp-block-paragraph">今回作成したEMD SWは車長が短いので、出力も短時間でした。ただ、手すりを別パーツとして作ったため、出力の向きやサポート位置でちょっと苦戦しました。 このようなパーツは一体の方が楽に出力できますが、後々の補修や塗装を考慮しました。</p>



<p class="wp-block-paragraph">動力は、トミーテックのTM-TR07を使用しました。 床下レリーフは他のDLに付いていた既製品です。 動力付属のレリーフも使えなくはないですが、干渉する爪部分をカットするとボディが固定できなくなりますのが難点です（笑） カプラーは、ナックル系カプラーの貨車が多いので、<a href="https://www.bachmanntrains.com/home-usa/">Bachmann </a>ダミーカプラーを模した出力品を装着しました。</p>



<h2 class="wp-block-heading">塗装</h2>



<p class="wp-block-paragraph">最初のEMD SW型は試し出しのボディー（笑） 何となくノーフォークサザンにしてみました。</p>



<figure class="wp-block-image size-medium"><a href="https://railroad.tomhirano.com/wp-content/uploads/2023/07/emd-switcher-norfolk-southern.jpg"><img loading="lazy" decoding="async" width="300" height="200" src="https://railroad.tomhirano.com/wp-content/uploads/2023/07/emd-switcher-norfolk-southern-300x200.jpg" alt="EMD SW in Norfolk Southern" class="wp-image-7381" srcset="https://railroad.tomhirano.com/wp-content/uploads/2023/07/emd-switcher-norfolk-southern-300x200.jpg 300w, https://railroad.tomhirano.com/wp-content/uploads/2023/07/emd-switcher-norfolk-southern-600x400.jpg 600w, https://railroad.tomhirano.com/wp-content/uploads/2023/07/emd-switcher-norfolk-southern-1024x682.jpg 1024w, https://railroad.tomhirano.com/wp-content/uploads/2023/07/emd-switcher-norfolk-southern-768x512.jpg 768w, https://railroad.tomhirano.com/wp-content/uploads/2023/07/emd-switcher-norfolk-southern-1140x759.jpg 1140w, https://railroad.tomhirano.com/wp-content/uploads/2023/07/emd-switcher-norfolk-southern.jpg 1201w" sizes="(max-width: 300px) 100vw, 300px" /></a></figure>



<p class="wp-block-paragraph">上と同型のボディシェルを用いて、アメリカ・テネシー州にあるイーストマン化学（コダック）の入換機のカラーリングに。</p>



<figure class="wp-block-image size-medium"><a href="https://railroad.tomhirano.com/wp-content/uploads/2023/07/emd-switcher-kodak-tennessee.jpg"><img loading="lazy" decoding="async" width="300" height="200" src="https://railroad.tomhirano.com/wp-content/uploads/2023/07/emd-switcher-kodak-tennessee-300x200.jpg" alt="EMD SW in Tennessee Eastman Kodak" class="wp-image-7380" srcset="https://railroad.tomhirano.com/wp-content/uploads/2023/07/emd-switcher-kodak-tennessee-300x200.jpg 300w, https://railroad.tomhirano.com/wp-content/uploads/2023/07/emd-switcher-kodak-tennessee-600x400.jpg 600w, https://railroad.tomhirano.com/wp-content/uploads/2023/07/emd-switcher-kodak-tennessee-1024x682.jpg 1024w, https://railroad.tomhirano.com/wp-content/uploads/2023/07/emd-switcher-kodak-tennessee-768x512.jpg 768w, https://railroad.tomhirano.com/wp-content/uploads/2023/07/emd-switcher-kodak-tennessee-1140x759.jpg 1140w, https://railroad.tomhirano.com/wp-content/uploads/2023/07/emd-switcher-kodak-tennessee.jpg 1201w" sizes="(max-width: 300px) 100vw, 300px" /></a></figure>



<p class="wp-block-paragraph">最後はSW1000に近いタイプのボディシェルを用いて、NY・ローチェスターのコダック入換機を再現。 ただ、細部は結構違うみたい。 このカラーリングは コダック VR-G フィルムが元だった気がします。</p>



<figure class="wp-block-image size-medium"><a href="https://railroad.tomhirano.com/wp-content/uploads/2023/07/emd-switcher-kodak-park.jpg"><img loading="lazy" decoding="async" width="300" height="200" src="https://railroad.tomhirano.com/wp-content/uploads/2023/07/emd-switcher-kodak-park-300x200.jpg" alt="EMD SW Kodak Park Switcher" class="wp-image-7379" srcset="https://railroad.tomhirano.com/wp-content/uploads/2023/07/emd-switcher-kodak-park-300x200.jpg 300w, https://railroad.tomhirano.com/wp-content/uploads/2023/07/emd-switcher-kodak-park-600x400.jpg 600w, https://railroad.tomhirano.com/wp-content/uploads/2023/07/emd-switcher-kodak-park-1024x682.jpg 1024w, https://railroad.tomhirano.com/wp-content/uploads/2023/07/emd-switcher-kodak-park-768x512.jpg 768w, https://railroad.tomhirano.com/wp-content/uploads/2023/07/emd-switcher-kodak-park-1140x759.jpg 1140w, https://railroad.tomhirano.com/wp-content/uploads/2023/07/emd-switcher-kodak-park.jpg 1201w" sizes="(max-width: 300px) 100vw, 300px" /></a></figure>



<p class="wp-block-paragraph"></p>



<h2 class="wp-block-heading">EMD SW を作って</h2>



<p class="wp-block-paragraph">今回のEMDスイッチャーは、ノス鉄動力活用法として作ってみました。 昔流行った Bトレインショーティーのようなミニレイアウトで走らせるとかわいいかもしれません。 ただ、フルサイズのEMD SWは多くのメーカーが生産・販売しているので、わざわざ時間をかけて作るのは疑問が残ります。てか、作っちゃったけど（笑） </p>



<p class="wp-block-paragraph"></p>



<p class="wp-block-paragraph"></p>
<p>The post <a href="https://railroad.tomhirano.com/3d-printed-trains/emd-sw-switcher/">ノス鉄サイズ EMD SW型ディーゼル機関車の製作</a> appeared first on <a href="https://railroad.tomhirano.com">Tom Hirano Trains</a>.</p>
]]></content:encoded>
					
		
		
			</item>
		<item>
		<title>F9PH ディーゼル機関車作りました</title>
		<link>https://railroad.tomhirano.com/3d-printed-trains/nscale-f9ph/</link>
		
		<dc:creator><![CDATA[トム]]></dc:creator>
		<pubDate>Tue, 28 Mar 2023 15:32:16 +0000</pubDate>
				<category><![CDATA[3D造形模型ネタ]]></category>
		<category><![CDATA[N Scale]]></category>
		<category><![CDATA[鉄道模型]]></category>
		<guid isPermaLink="false">https://railroad.tomhirano.com/?p=7310</guid>

					<description><![CDATA[<p>F9PH ディーゼル機関車とは F9PH は、元Baltimore &#38; Ohio 鉄道の EMD F7・F3 を Morrison-Knudsenがメリーランド州交通局用にリビルドした機関車です。 主な改造点は、 [&#8230;]</p>
<p>The post <a href="https://railroad.tomhirano.com/3d-printed-trains/nscale-f9ph/">F9PH ディーゼル機関車作りました</a> appeared first on <a href="https://railroad.tomhirano.com">Tom Hirano Trains</a>.</p>
]]></description>
										<content:encoded><![CDATA[
<h2 class="wp-block-heading">F9PH ディーゼル機関車とは</h2>



<p class="wp-block-paragraph">F9PH は、元Baltimore &amp; Ohio 鉄道の EMD F7・F3 を Morrison-Knudsenがメリーランド州交通局用にリビルドした機関車です。 主な改造点は、エンジンの載せ替えと客車用電源を搭載したところ。 外見的には、正面ドアなし、角形スカート、屋根に発電機のマフラーが特徴です。 側面窓（ポートホール）も塞がれてます。 導入時は5機 (MDOT #7181-7185)が存在しました。 </p>



<p class="wp-block-paragraph">そっくりな7100号機は、動力エンジンを撤去したAuxiliary Power Control Unitで、プッシュプル運転時に使われていたようです。</p>



<h2 class="wp-block-heading">Bachmann F9動力バージョン</h2>



<p class="wp-block-paragraph">床下は作る気がなかったので、<a href="https://www.bachmanntrains.com/home-usa/">Bachmann</a> の N F9の代替ボディシェルとして描きました。 このBachmannのF9は、ギア類を優先して設計されたためか、ボディが少し長めです。</p>



<figure class="wp-block-image size-full is-resized"><img loading="lazy" decoding="async" width="800" height="533" src="https://railroad.tomhirano.com/wp-content/uploads/2023/03/mdot-7183.jpg" alt="maryland dot F9PH 7183" class="wp-image-7324" style="width:600px;height:400px" srcset="https://railroad.tomhirano.com/wp-content/uploads/2023/03/mdot-7183.jpg 800w, https://railroad.tomhirano.com/wp-content/uploads/2023/03/mdot-7183-600x400.jpg 600w, https://railroad.tomhirano.com/wp-content/uploads/2023/03/mdot-7183-300x200.jpg 300w, https://railroad.tomhirano.com/wp-content/uploads/2023/03/mdot-7183-768x512.jpg 768w" sizes="(max-width: 800px) 100vw, 800px" /></figure>



<p class="wp-block-paragraph">イメージしていたものに近かったので、もうこれで終わりにしようかなと思ったものの、なんか物足りない。 折角だから、DCCも載せられる動力がいいなということで、F7動力用も設計（笑） </p>



<h2 class="wp-block-heading">Kato F7動力用</h2>



<p class="wp-block-paragraph"><a href="https://katousa.com/">カトー</a>動力バージョンは、Bachmann F9用と比べると短め。 さらに幅もBachmannより少し太め。 </p>



<figure class="wp-block-image size-full is-resized"><img loading="lazy" decoding="async" width="800" height="533" src="https://railroad.tomhirano.com/wp-content/uploads/2023/03/f9-f7-comparison.jpg" alt="F7/F9 comparison" class="wp-image-7325" style="width:600px;height:400px" srcset="https://railroad.tomhirano.com/wp-content/uploads/2023/03/f9-f7-comparison.jpg 800w, https://railroad.tomhirano.com/wp-content/uploads/2023/03/f9-f7-comparison-600x400.jpg 600w, https://railroad.tomhirano.com/wp-content/uploads/2023/03/f9-f7-comparison-300x200.jpg 300w, https://railroad.tomhirano.com/wp-content/uploads/2023/03/f9-f7-comparison-768x512.jpg 768w" sizes="(max-width: 800px) 100vw, 800px" /><figcaption class="wp-element-caption">上がBachmann F9動力版, 下がKato/Bachmann F7動力用。屋根のディテールがズレてるのは気のせい（笑）</figcaption></figure>



<p class="wp-block-paragraph">更にデカールを貼りやすくするため、側面手すりは別パーツ化。こちらもUVレジンです。とりあえず、初期型とディッチライト付きの末期型の2種類を3D出力してみました。</p>



<h3 class="wp-block-heading">Maryland DOT バージョン（初期型）</h3>



<p class="wp-block-paragraph">F9PHリビルト直後の姿で再現。床下も銀色で好きです。(足回りは Bachmann F7) </p>



<figure class="wp-block-image size-full is-resized"><a href="https://railroad.tomhirano.com/wp-content/uploads/2023/03/mdot-7185.jpg"><img loading="lazy" decoding="async" width="800" height="533" src="https://railroad.tomhirano.com/wp-content/uploads/2023/03/mdot-7185.jpg" alt="maryland dot F9PH 7185" class="wp-image-7317" style="width:600px;height:400px" srcset="https://railroad.tomhirano.com/wp-content/uploads/2023/03/mdot-7185.jpg 800w, https://railroad.tomhirano.com/wp-content/uploads/2023/03/mdot-7185-600x400.jpg 600w, https://railroad.tomhirano.com/wp-content/uploads/2023/03/mdot-7185-300x200.jpg 300w, https://railroad.tomhirano.com/wp-content/uploads/2023/03/mdot-7185-768x512.jpg 768w" sizes="(max-width: 800px) 100vw, 800px" /></a></figure>



<h3 class="wp-block-heading">Chessie Sytem バージョン（架空塗装）</h3>



<p class="wp-block-paragraph">折角なので大好きな Chessie System 架空塗装（笑）(足回りは Kato F7) </p>



<figure class="wp-block-image size-full is-resized"><a href="https://railroad.tomhirano.com/wp-content/uploads/2023/03/chessie-7189.jpg"><img loading="lazy" decoding="async" width="800" height="533" src="https://railroad.tomhirano.com/wp-content/uploads/2023/03/chessie-7189.jpg" alt="Chessie System F9PH (Fantasy paint scheme)" class="wp-image-7314" style="width:600px;height:400px" srcset="https://railroad.tomhirano.com/wp-content/uploads/2023/03/chessie-7189.jpg 800w, https://railroad.tomhirano.com/wp-content/uploads/2023/03/chessie-7189-600x400.jpg 600w, https://railroad.tomhirano.com/wp-content/uploads/2023/03/chessie-7189-300x200.jpg 300w, https://railroad.tomhirano.com/wp-content/uploads/2023/03/chessie-7189-768x512.jpg 768w" sizes="(max-width: 800px) 100vw, 800px" /></a></figure>



<h3 class="wp-block-heading">Washington Central バージョン（ディッチライト有）</h3>



<p class="wp-block-paragraph">Washington Central Railroad (WCRC) のF9PHは、ディナートレイン用として導入されていたようです。赤い塗装がとても魅力的。(足回りは Kato F7) </p>



<h4 class="wp-block-heading">WCRC 82号機（ 元MDOT F9PH 7182 / CNJ 14 / B&amp;O 4582 / B&amp;O F7A 939 ）</h4>



<figure class="wp-block-image size-full is-resized"><a href="https://railroad.tomhirano.com/wp-content/uploads/2023/03/f9ph-wcrc82.jpg"><img loading="lazy" decoding="async" width="800" height="533" src="https://railroad.tomhirano.com/wp-content/uploads/2023/03/f9ph-wcrc82.jpg" alt="Washington Central F9PH 82" class="wp-image-7315" style="width:600px;height:400px" srcset="https://railroad.tomhirano.com/wp-content/uploads/2023/03/f9ph-wcrc82.jpg 800w, https://railroad.tomhirano.com/wp-content/uploads/2023/03/f9ph-wcrc82-600x400.jpg 600w, https://railroad.tomhirano.com/wp-content/uploads/2023/03/f9ph-wcrc82-300x200.jpg 300w, https://railroad.tomhirano.com/wp-content/uploads/2023/03/f9ph-wcrc82-768x512.jpg 768w" sizes="(max-width: 800px) 100vw, 800px" /></a></figure>



<h4 class="wp-block-heading">WCRC 84号機（ 元MDOT F9PH 7184 / B&amp;O 4472 / B&amp;O F3A 165 ）</h4>



<figure class="wp-block-image size-full is-resized"><a href="https://railroad.tomhirano.com/wp-content/uploads/2023/03/f9ph-wcrc84.jpg"><img loading="lazy" decoding="async" width="800" height="533" src="https://railroad.tomhirano.com/wp-content/uploads/2023/03/f9ph-wcrc84.jpg" alt="Washington Central RR F9PH 84" class="wp-image-7316" style="width:600px;height:400px" srcset="https://railroad.tomhirano.com/wp-content/uploads/2023/03/f9ph-wcrc84.jpg 800w, https://railroad.tomhirano.com/wp-content/uploads/2023/03/f9ph-wcrc84-600x400.jpg 600w, https://railroad.tomhirano.com/wp-content/uploads/2023/03/f9ph-wcrc84-300x200.jpg 300w, https://railroad.tomhirano.com/wp-content/uploads/2023/03/f9ph-wcrc84-768x512.jpg 768w" sizes="(max-width: 800px) 100vw, 800px" /></a></figure>



<p class="wp-block-paragraph">82と84は、星条旗の貼り付け位置が違うようです。種車が異なるため屋根上のディテールも違う気がしますが、資料がなくて確認できず。 塗装は面倒でしたが作って良かったなと思えた塗装です。 ただ牽引する客車がありません（笑）作れって？（笑）</p>



<p class="wp-block-paragraph"></p>



<h2 class="wp-block-heading">F9PHを作り終えて</h2>



<p class="wp-block-paragraph">元々はドッグノーズ型ボンネットのお絵描き練習でしたが、ある程度見れる形になって良かったです。　そう、これはドッグノーズのお絵描き練習。 ということはこのあと本命の車輌が（笑）<br />近々 <a href="https://railroad.tomhirano.com/n-scale/nj-transit/">NJ Transit</a> E8 と<a href="https://railroad.tomhirano.com/n-scale/amtrak/"> Amtrak</a> E8 4316 にチャレンジします。 </p>



<hr class="wp-block-separator has-alpha-channel-opacity"/>



<p class="has-small-font-size wp-block-paragraph">memo: </p>



<p class="has-small-font-size wp-block-paragraph">出力 Anycubic Photon SE / Anycubic ABS like resin black<br />MDOT paint: Tamiya TS-17, グレオス黒サフ1500, 橙：独自調合<br />WCRC paint: Tamiya TS49（Airbrush),  グレオス黒サフ1500</p>



<p class="wp-block-paragraph"></p>



<p class="wp-block-paragraph"></p>



<p class="wp-block-paragraph"></p>



<p class="wp-block-paragraph"></p>



<p class="wp-block-paragraph"></p>
<p>The post <a href="https://railroad.tomhirano.com/3d-printed-trains/nscale-f9ph/">F9PH ディーゼル機関車作りました</a> appeared first on <a href="https://railroad.tomhirano.com">Tom Hirano Trains</a>.</p>
]]></content:encoded>
					
		
		
			</item>
		<item>
		<title>PRR N-8 カブース作りました</title>
		<link>https://railroad.tomhirano.com/3d-printed-trains/n8-caboose/</link>
		
		<dc:creator><![CDATA[トム]]></dc:creator>
		<pubDate>Wed, 22 Feb 2023 16:28:40 +0000</pubDate>
				<category><![CDATA[3D造形模型ネタ]]></category>
		<category><![CDATA[N Scale]]></category>
		<category><![CDATA[鉄道模型]]></category>
		<guid isPermaLink="false">https://railroad.tomhirano.com/?p=7288</guid>

					<description><![CDATA[<p>先日のトランスファーカブースに続き、PRR N-8 Caboose (カブース) も作ってみました。 今回の模型は、まだ未公開？のストリームラインキュポラカブースのデータをアレンジしたもの。 ですので、リベット位置がN8 [&#8230;]</p>
<p>The post <a href="https://railroad.tomhirano.com/3d-printed-trains/n8-caboose/">PRR N-8 カブース作りました</a> appeared first on <a href="https://railroad.tomhirano.com">Tom Hirano Trains</a>.</p>
]]></description>
										<content:encoded><![CDATA[
<p class="wp-block-paragraph">先日の<a href="https://railroad.tomhirano.com/3d-printed-trains/canadian-national-transfer-caboose/">トランスファーカブース</a>に続き、PRR N-8 Caboose (カブース) も作ってみました。 今回の模型は、まだ未公開？のストリームラインキュポラカブースのデータをアレンジしたもの。 ですので、リベット位置がN8とはちょっと違います。 形状はだいたい同じです。</p>



<h2 class="wp-block-heading">N-8 カブース模型の構造</h2>



<p class="wp-block-paragraph">先日のトランスファーカブースのデータを修正して作りました。というわけで構造はほとんど一緒です（笑）</p>



<figure class="wp-block-image size-large is-resized"><img loading="lazy" decoding="async" width="1024" height="756" src="https://railroad.tomhirano.com/wp-content/uploads/2023/02/n8-caboose-parts-1024x756.jpg" alt="カブース構造" class="wp-image-7292" style="width:768px;height:567px" srcset="https://railroad.tomhirano.com/wp-content/uploads/2023/02/n8-caboose-parts-1024x756.jpg 1024w, https://railroad.tomhirano.com/wp-content/uploads/2023/02/n8-caboose-parts-600x443.jpg 600w, https://railroad.tomhirano.com/wp-content/uploads/2023/02/n8-caboose-parts-300x222.jpg 300w, https://railroad.tomhirano.com/wp-content/uploads/2023/02/n8-caboose-parts-768x567.jpg 768w, https://railroad.tomhirano.com/wp-content/uploads/2023/02/n8-caboose-parts.jpg 1083w" sizes="(max-width: 1024px) 100vw, 1024px" /></figure>



<h4 class="wp-block-heading">ボディ</h4>



<p class="wp-block-paragraph">N-8 本体部分は一体です。キュポラ部分を別パーツ化した方が、塗りやすそうです。 そのうち変更するかもしれません。 </p>



<h4 class="wp-block-heading">シャーシ</h4>



<p class="wp-block-paragraph">ボディ側面が覆いかぶさるよう、中心部は細めにしました。ただ平らなので、反りがちょっと心配です。</p>



<h4 class="wp-block-heading">エンド部分</h4>



<p class="wp-block-paragraph">前回同様エンド部分は別パーツ化。 カブースのエンドは時代や鉄道会社によって結構変化しているので、付け替えられるようにしました。 </p>



<h4 class="wp-block-heading">小物類</h4>



<p class="wp-block-paragraph">側面のアール状の手すりを別パーツ化したくらいです。 一体でも良かったのですが、別の方が塗りやすかったので。あと、煙突も2パターン作ってみました。電話アンテナ仕様のアンテナ部分は別パーツです。</p>



<h2 class="wp-block-heading">N-8の塗装パターン</h2>



<p class="wp-block-paragraph">N-8 caboose は、元々<a href="https://en.wikipedia.org/wiki/Pennsylvania_Railroad">ペンシルベニア鉄道</a>向けに新造されたものです。 その後、Pen Central, Conrail と引き継がれました。一部は Illinois Central Gulf にも移籍しました。</p>



<h3 class="wp-block-heading">ペンシルベニア鉄道（茶）</h3>



<figure class="wp-block-image size-large is-resized"><img loading="lazy" decoding="async" width="1024" height="682" src="https://railroad.tomhirano.com/wp-content/uploads/2023/02/n8-caboose-prr-brown-1024x682.jpg" alt="Pennsylvania Railroad caboose" class="wp-image-7283" style="width:512px;height:341px" srcset="https://railroad.tomhirano.com/wp-content/uploads/2023/02/n8-caboose-prr-brown-1024x682.jpg 1024w, https://railroad.tomhirano.com/wp-content/uploads/2023/02/n8-caboose-prr-brown-600x400.jpg 600w, https://railroad.tomhirano.com/wp-content/uploads/2023/02/n8-caboose-prr-brown-300x200.jpg 300w, https://railroad.tomhirano.com/wp-content/uploads/2023/02/n8-caboose-prr-brown-768x512.jpg 768w, https://railroad.tomhirano.com/wp-content/uploads/2023/02/n8-caboose-prr-brown.jpg 1100w" sizes="(max-width: 1024px) 100vw, 1024px" /></figure>



<p class="wp-block-paragraph">N-8が新造された頃の雰囲気で塗ってみました。屋根にあるのは電話用アンテナ。</p>



<h3 class="wp-block-heading">ペンシルベニア鉄道（赤）</h3>



<figure class="wp-block-image size-large is-resized"><img loading="lazy" decoding="async" width="1024" height="682" src="https://railroad.tomhirano.com/wp-content/uploads/2023/02/n8-caboose-prr-red-1024x682.jpg" alt="PRR caboose (n-8)" class="wp-image-7284" style="width:512px;height:341px" srcset="https://railroad.tomhirano.com/wp-content/uploads/2023/02/n8-caboose-prr-red-1024x682.jpg 1024w, https://railroad.tomhirano.com/wp-content/uploads/2023/02/n8-caboose-prr-red-600x400.jpg 600w, https://railroad.tomhirano.com/wp-content/uploads/2023/02/n8-caboose-prr-red-300x200.jpg 300w, https://railroad.tomhirano.com/wp-content/uploads/2023/02/n8-caboose-prr-red-768x512.jpg 768w, https://railroad.tomhirano.com/wp-content/uploads/2023/02/n8-caboose-prr-red.jpg 1100w" sizes="(max-width: 1024px) 100vw, 1024px" /></figure>



<p class="wp-block-paragraph">茶だけじゃ地味なので（笑）形状はアンテナ付きにしてみました。 </p>



<h3 class="wp-block-heading">ペンセントラル鉄道</h3>



<figure class="wp-block-image size-large is-resized"><img loading="lazy" decoding="async" width="1024" height="682" src="https://railroad.tomhirano.com/wp-content/uploads/2023/02/n8-caboose-penncentral-1024x682.jpg" alt="Penn Central N8 caboose" class="wp-image-7282" style="width:512px;height:341px" srcset="https://railroad.tomhirano.com/wp-content/uploads/2023/02/n8-caboose-penncentral-1024x682.jpg 1024w, https://railroad.tomhirano.com/wp-content/uploads/2023/02/n8-caboose-penncentral-600x400.jpg 600w, https://railroad.tomhirano.com/wp-content/uploads/2023/02/n8-caboose-penncentral-300x200.jpg 300w, https://railroad.tomhirano.com/wp-content/uploads/2023/02/n8-caboose-penncentral-768x512.jpg 768w, https://railroad.tomhirano.com/wp-content/uploads/2023/02/n8-caboose-penncentral.jpg 1100w" sizes="(max-width: 1024px) 100vw, 1024px" /></figure>



<p class="wp-block-paragraph">ペンシルベニアから引き継いだ頃の雰囲気で。線のあるタイプは結構レアなのかも。</p>



<h3 class="wp-block-heading">コンレール鉄道</h3>



<figure class="wp-block-image size-large is-resized"><img loading="lazy" decoding="async" width="1024" height="682" src="https://railroad.tomhirano.com/wp-content/uploads/2023/02/n8-caboose-conrail-1024x682.jpg" alt="Conrail N8 caboose" class="wp-image-7280" style="width:512px;height:341px" srcset="https://railroad.tomhirano.com/wp-content/uploads/2023/02/n8-caboose-conrail-1024x682.jpg 1024w, https://railroad.tomhirano.com/wp-content/uploads/2023/02/n8-caboose-conrail-600x400.jpg 600w, https://railroad.tomhirano.com/wp-content/uploads/2023/02/n8-caboose-conrail-300x200.jpg 300w, https://railroad.tomhirano.com/wp-content/uploads/2023/02/n8-caboose-conrail-768x512.jpg 768w, https://railroad.tomhirano.com/wp-content/uploads/2023/02/n8-caboose-conrail.jpg 1100w" sizes="(max-width: 1024px) 100vw, 1024px" /></figure>



<p class="wp-block-paragraph">ペンセントラルから引き継いだ時の雰囲気で。 後に、屋根のルーフウォークが撤去されたり、梯子が撤去されました。</p>



<h3 class="wp-block-heading">イリノイセントラルガルフ鉄道</h3>



<figure class="wp-block-image size-large is-resized"><img loading="lazy" decoding="async" width="1024" height="682" src="https://railroad.tomhirano.com/wp-content/uploads/2023/02/n8-caboose-icg-1024x682.jpg" alt="Illinois Central Gulf (ICG) N8 caboose" class="wp-image-7281" style="width:512px;height:341px" srcset="https://railroad.tomhirano.com/wp-content/uploads/2023/02/n8-caboose-icg-1024x682.jpg 1024w, https://railroad.tomhirano.com/wp-content/uploads/2023/02/n8-caboose-icg-600x400.jpg 600w, https://railroad.tomhirano.com/wp-content/uploads/2023/02/n8-caboose-icg-300x200.jpg 300w, https://railroad.tomhirano.com/wp-content/uploads/2023/02/n8-caboose-icg-768x512.jpg 768w, https://railroad.tomhirano.com/wp-content/uploads/2023/02/n8-caboose-icg.jpg 1100w" sizes="(max-width: 1024px) 100vw, 1024px" /></figure>



<p class="wp-block-paragraph">イリノイに渡った際の仕様に。ルーフウォークへの梯子位置が左から右へ。写真ではよくわかりませんが、エンドの骨組みも逆ハの字になっています。</p>



<h2 class="wp-block-heading">工作を終えて</h2>



<p class="wp-block-paragraph">N-8 カブースはサクサク作れて楽しかったです。3Dプリンターで全パーツが1回で出力でき楽でした。 塗装バリエーションは、上記でだいたいカバーできたかと思います。 せっかくボディがあるので、他社線の架空塗装も作ってみたいです。</p>



<p class="wp-block-paragraph"></p>



<p class="wp-block-paragraph"></p>
<p>The post <a href="https://railroad.tomhirano.com/3d-printed-trains/n8-caboose/">PRR N-8 カブース作りました</a> appeared first on <a href="https://railroad.tomhirano.com">Tom Hirano Trains</a>.</p>
]]></content:encoded>
					
		
		
			</item>
		<item>
		<title>トランスファーカブース (CN) 作りました</title>
		<link>https://railroad.tomhirano.com/3d-printed-trains/canadian-national-transfer-caboose/</link>
		
		<dc:creator><![CDATA[トム]]></dc:creator>
		<pubDate>Fri, 17 Feb 2023 15:24:48 +0000</pubDate>
				<category><![CDATA[3D造形模型ネタ]]></category>
		<category><![CDATA[N Scale]]></category>
		<category><![CDATA[鉄道模型]]></category>
		<guid isPermaLink="false">https://railroad.tomhirano.com/?p=7249</guid>

					<description><![CDATA[<p>ちょっと前にカナディアンナショナルのSD40-2Wを入手したので、昨年暮れごろからトランスファーカブース （車掌車）を自作してみました。 アメリカ型流用だと面白くないので、カナダ特有のこの型を選択。 この Transfe [&#8230;]</p>
<p>The post <a href="https://railroad.tomhirano.com/3d-printed-trains/canadian-national-transfer-caboose/">トランスファーカブース (CN) 作りました</a> appeared first on <a href="https://railroad.tomhirano.com">Tom Hirano Trains</a>.</p>
]]></description>
										<content:encoded><![CDATA[
<figure class="wp-block-image alignright size-medium"><a href="https://railroad.tomhirano.com/wp-content/uploads/2023/02/cnr-enddetails.jpg"><img loading="lazy" decoding="async" width="300" height="200" src="https://railroad.tomhirano.com/wp-content/uploads/2023/02/cnr-enddetails-300x200.jpg" alt="Candaian National transfer caboose" class="wp-image-7267" srcset="https://railroad.tomhirano.com/wp-content/uploads/2023/02/cnr-enddetails-300x200.jpg 300w, https://railroad.tomhirano.com/wp-content/uploads/2023/02/cnr-enddetails-600x400.jpg 600w, https://railroad.tomhirano.com/wp-content/uploads/2023/02/cnr-enddetails-1024x682.jpg 1024w, https://railroad.tomhirano.com/wp-content/uploads/2023/02/cnr-enddetails-768x512.jpg 768w, https://railroad.tomhirano.com/wp-content/uploads/2023/02/cnr-enddetails-1140x759.jpg 1140w, https://railroad.tomhirano.com/wp-content/uploads/2023/02/cnr-enddetails.jpg 1201w" sizes="(max-width: 300px) 100vw, 300px" /></a><figcaption class="wp-element-caption">CNトランスファーカブース特有の左右非対称</figcaption></figure>



<p class="wp-block-paragraph">ちょっと前に<a href="https://www.cn.ca/en/">カナディアンナショナル</a>のSD40-2Wを入手したので、昨年暮れごろからトランスファーカブース （車掌車）を自作してみました。 アメリカ型流用だと面白くないので、カナダ特有のこの型を選択。 この Transfer caboose の特徴は、視界確保のため袖がある＆左右非対称なところ。 やはり、ユニークな形状はなんかそそられますね（え）</p>



<h2 class="wp-block-heading">トランスファーカブースの設計</h2>



<p class="wp-block-paragraph">カブースの構造は何度か変更しましたが、結局落ち着いたのがこの構造。</p>



<figure class="wp-block-image size-large is-resized"><a href="https://railroad.tomhirano.com/wp-content/uploads/2023/02/DSC05728.jpg"><img loading="lazy" decoding="async" src="https://railroad.tomhirano.com/wp-content/uploads/2023/02/DSC05728-1024x767.jpg" alt="" class="wp-image-7255" width="768" height="575" srcset="https://railroad.tomhirano.com/wp-content/uploads/2023/02/DSC05728-1024x767.jpg 1024w, https://railroad.tomhirano.com/wp-content/uploads/2023/02/DSC05728-600x449.jpg 600w, https://railroad.tomhirano.com/wp-content/uploads/2023/02/DSC05728-300x225.jpg 300w, https://railroad.tomhirano.com/wp-content/uploads/2023/02/DSC05728-768x575.jpg 768w, https://railroad.tomhirano.com/wp-content/uploads/2023/02/DSC05728-1140x854.jpg 1140w, https://railroad.tomhirano.com/wp-content/uploads/2023/02/DSC05728.jpg 1202w" sizes="(max-width: 768px) 100vw, 768px" /></a></figure>



<h4 class="wp-block-heading">ボディ</h4>



<p class="wp-block-paragraph">屋根と箱部分。最初は分離した方が塗装時楽かと思いましたが、形状を整える手間を考えると一体化の方が歪みが出にくいと思い、結局一体化。 </p>



<h4 class="wp-block-heading">シャーシ</h4>



<p class="wp-block-paragraph">平らな造形に。ただこの構造は、台車のカプラーボックス分の高さを確保すると腰高に。 対策として、専用のカプラー取付口も作ることも考えたのですが、面倒だったので高さがあまりない<a href="https://shop.atlasrr.com/">アトラス</a>の台車でカバーしました。 勾配がきつくなければギリギリセーフ。</p>



<h4 class="wp-block-heading">エンド部分</h4>



<p class="wp-block-paragraph">シャーシと一体で出すことも可能でしたが、破損時の事を考えて別パーツ化。 おまけに、異なるエンドと組み合わせれば、異なるデザインの架空カブースが作りやすいので一石二鳥。 </p>



<h4 class="wp-block-heading">小物類</h4>



<p class="wp-block-paragraph">ドア、手すり、補助ランプ、煙突等は、塗装しやすく別パーツ化。手すりはもう少し細めに仕上げたかったのですが、空中に飛び出す部分があったので強度を考えて太めに。</p>



<h2 class="wp-block-heading">カブース一作目</h2>



<figure class="wp-block-image size-large is-resized"><a href="https://railroad.tomhirano.com/wp-content/uploads/2023/02/cnr-76654.jpg"><img loading="lazy" decoding="async" src="https://railroad.tomhirano.com/wp-content/uploads/2023/02/cnr-76654-1024x682.jpg" alt="CN トランスファーカブース A" class="wp-image-7265" width="768" height="512" srcset="https://railroad.tomhirano.com/wp-content/uploads/2023/02/cnr-76654-1024x682.jpg 1024w, https://railroad.tomhirano.com/wp-content/uploads/2023/02/cnr-76654-600x400.jpg 600w, https://railroad.tomhirano.com/wp-content/uploads/2023/02/cnr-76654-300x200.jpg 300w, https://railroad.tomhirano.com/wp-content/uploads/2023/02/cnr-76654-768x512.jpg 768w, https://railroad.tomhirano.com/wp-content/uploads/2023/02/cnr-76654-1140x759.jpg 1140w, https://railroad.tomhirano.com/wp-content/uploads/2023/02/cnr-76654.jpg 1201w" sizes="(max-width: 768px) 100vw, 768px" /></a></figure>



<p class="wp-block-paragraph">カプラーをボディマウントしたパターンで作成しましたが、カプラーが若干低めになってしまうのが難点。 床下のバランスは悪くない感じです。</p>



<h2 class="wp-block-heading">カブース2作目</h2>



<figure class="wp-block-image size-large is-resized"><a href="https://railroad.tomhirano.com/wp-content/uploads/2023/02/cnr-76687.jpg"><img loading="lazy" decoding="async" src="https://railroad.tomhirano.com/wp-content/uploads/2023/02/cnr-76687-1024x682.jpg" alt="CN トランスファーカブース B" class="wp-image-7266" width="768" height="512" srcset="https://railroad.tomhirano.com/wp-content/uploads/2023/02/cnr-76687-1024x682.jpg 1024w, https://railroad.tomhirano.com/wp-content/uploads/2023/02/cnr-76687-600x400.jpg 600w, https://railroad.tomhirano.com/wp-content/uploads/2023/02/cnr-76687-300x200.jpg 300w, https://railroad.tomhirano.com/wp-content/uploads/2023/02/cnr-76687-768x512.jpg 768w, https://railroad.tomhirano.com/wp-content/uploads/2023/02/cnr-76687-1140x759.jpg 1140w, https://railroad.tomhirano.com/wp-content/uploads/2023/02/cnr-76687.jpg 1201w" sizes="(max-width: 768px) 100vw, 768px" /></a></figure>



<p class="wp-block-paragraph">カプラーの高さを安定させるため、アトラスのアキュメイトカプラー付き台車に変更。 しかし、ボディとカプラーに高さのクリアランスがあまりないので勾配でどうなるかは不明（笑） 台車が車端寄りになってしまったため床下にやや空きが。 実車より長めなのかもしれない（笑） </p>



<h2 class="wp-block-heading">塗装</h2>



<p class="wp-block-paragraph">カナディアンナショナルのカブースは基本的には朱色＋黒なので簡単。 しかし、警戒色部分まで塗装でやるとマスキングが結構面倒に。 特に台枠の側面に黄色を残しての塗装はちょっと面倒なので、もうやりたくないです。 次は<a href="https://amzn.to/3Ihwd19">ガンダムマーカー</a>だな（笑） ちなみに、朱色はタミヤの赤に黄を少し足しました（目分量w）</p>



<p class="wp-block-paragraph">塗装バリエーションですが、CN以外で活躍したケースがないようで、あまり選べません。 ただ、特殊な塗装でATCSのテストカーがあるので作ってみたいです。 ついでに、CNっぽい車端の柵を変えて、架空塗装も作ってみたいです。</p>



<p class="wp-block-paragraph"></p>



<p class="wp-block-paragraph"></p>



<p class="wp-block-paragraph"></p>



<p class="wp-block-paragraph"></p>
<p>The post <a href="https://railroad.tomhirano.com/3d-printed-trains/canadian-national-transfer-caboose/">トランスファーカブース (CN) 作りました</a> appeared first on <a href="https://railroad.tomhirano.com">Tom Hirano Trains</a>.</p>
]]></content:encoded>
					
		
		
			</item>
		<item>
		<title>Shapewaysで E60MA 出力してみた</title>
		<link>https://railroad.tomhirano.com/3d-printed-trains/e60ma-shapeways/</link>
		
		<dc:creator><![CDATA[トム]]></dc:creator>
		<pubDate>Sun, 30 Oct 2022 12:20:52 +0000</pubDate>
				<category><![CDATA[3D造形模型ネタ]]></category>
		<category><![CDATA[Amtrak]]></category>
		<category><![CDATA[N Scale]]></category>
		<category><![CDATA[鉄道模型]]></category>
		<guid isPermaLink="false">https://railroad.tomhirano.com/?p=6156</guid>

					<description><![CDATA[<p>海外3D出力サービス Shapeways（シェイプウェイズ）を初めて利用しました。 まずは、Amtrak で活躍した GE E60MA のデータをアップロード。 出力素材は、スムーズ・ファイン・ディテール・プラスチック  [&#8230;]</p>
<p>The post <a href="https://railroad.tomhirano.com/3d-printed-trains/e60ma-shapeways/">Shapewaysで E60MA 出力してみた</a> appeared first on <a href="https://railroad.tomhirano.com">Tom Hirano Trains</a>.</p>
]]></description>
										<content:encoded><![CDATA[
<p class="wp-block-paragraph">海外3D出力サービス <a href="https://www.shapeways.com/">Shapeways</a>（シェイプウェイズ）を初めて利用しました。 まずは、Amtrak で活躍した GE E60MA のデータをアップロード。 出力素材は、スムーズ・ファイン・ディテール・プラスチック を選択。 通常発送を選択しましたが、1週間かからず到着。 送料が思ったより高いのが辛いです（笑） おまけに円安w</p>



<h3 class="wp-block-heading">E60MA 到着</h3>



<figure class="wp-block-image size-large is-resized is-style-default"><img loading="lazy" decoding="async" src="https://railroad.tomhirano.com/wp-content/uploads/2022/10/e80ma-shapeways-shell-1024x767.jpg" alt="E80MA Shapeways shell" class="wp-image-6160" width="768" height="575" srcset="https://railroad.tomhirano.com/wp-content/uploads/2022/10/e80ma-shapeways-shell-1024x767.jpg 1024w, https://railroad.tomhirano.com/wp-content/uploads/2022/10/e80ma-shapeways-shell-600x449.jpg 600w, https://railroad.tomhirano.com/wp-content/uploads/2022/10/e80ma-shapeways-shell-300x225.jpg 300w, https://railroad.tomhirano.com/wp-content/uploads/2022/10/e80ma-shapeways-shell-768x575.jpg 768w, https://railroad.tomhirano.com/wp-content/uploads/2022/10/e80ma-shapeways-shell.jpg 1068w" sizes="(max-width: 768px) 100vw, 768px" /></figure>



<p class="wp-block-paragraph">うちのUVレジン3Dプリンターより直線的な部分は綺麗に出てます。 細部も出てはいますが、段差も結構あったり、筋もあるので、ヤスリで整える必要がありそうです。 強度は、普段使っているノーマルのUVレジンより少しは丈夫かな、って感じです。 おまけに、UVレジンのように縮みの心配がないのがいいですね。</p>



<h3 class="wp-block-heading">ヤスリ掛け</h3>



<p class="wp-block-paragraph">ヤスリをかけるとディテールが損なわれるので、平面を中心にヤスリをかけました。 E60MAで言うとシルバーの部分です。 屋根上やディテールのある部分は、軽めに。</p>



<h3 class="wp-block-heading">塗装</h3>



<p class="wp-block-paragraph">塗料前にIPAあたりを使って脱脂したほうが良さそうです。 そのあとは、サーフェーサー＞やすり＞サーフェーサーとやってみました。 下地が整ったら、いつもと同じの塗装作業です。</p>



<figure class="wp-block-image size-large is-resized is-style-default"><img loading="lazy" decoding="async" src="https://railroad.tomhirano.com/wp-content/uploads/2022/10/E60MA-primed-1024x767.jpg" alt="" class="wp-image-6161" width="768" height="575" srcset="https://railroad.tomhirano.com/wp-content/uploads/2022/10/E60MA-primed-1024x767.jpg 1024w, https://railroad.tomhirano.com/wp-content/uploads/2022/10/E60MA-primed-600x449.jpg 600w, https://railroad.tomhirano.com/wp-content/uploads/2022/10/E60MA-primed-300x225.jpg 300w, https://railroad.tomhirano.com/wp-content/uploads/2022/10/E60MA-primed-768x575.jpg 768w, https://railroad.tomhirano.com/wp-content/uploads/2022/10/E60MA-primed.jpg 1068w" sizes="(max-width: 768px) 100vw, 768px" /></figure>



<h3 class="wp-block-heading">E60MA 完成</h3>



<p class="wp-block-paragraph">Microscale Decalやら自作デカールをペタペタ。 まぁこんなもんですかね（笑）</p>



<figure class="wp-block-image size-large is-resized is-style-default"><img loading="lazy" decoding="async" src="https://railroad.tomhirano.com/wp-content/uploads/2022/10/Shapeways-E60MA-1024x682.jpg" alt="Amtrak E60MA" class="wp-image-6162" width="768" height="512" srcset="https://railroad.tomhirano.com/wp-content/uploads/2022/10/Shapeways-E60MA-1024x682.jpg 1024w, https://railroad.tomhirano.com/wp-content/uploads/2022/10/Shapeways-E60MA-600x400.jpg 600w, https://railroad.tomhirano.com/wp-content/uploads/2022/10/Shapeways-E60MA-300x200.jpg 300w, https://railroad.tomhirano.com/wp-content/uploads/2022/10/Shapeways-E60MA-768x512.jpg 768w, https://railroad.tomhirano.com/wp-content/uploads/2022/10/Shapeways-E60MA-1140x759.jpg 1140w, https://railroad.tomhirano.com/wp-content/uploads/2022/10/Shapeways-E60MA.jpg 1201w" sizes="(max-width: 768px) 100vw, 768px" /></figure>



<p class="wp-block-paragraph">ちなみに今回アップロードしたE60MAは、Bachmann <a href="https://railroad.tomhirano.com/railroad/e60cp/">E60CP</a>の代替ボディとして作りました。 そのため、動力やパンタグラフはBachmannのを流用します。 カプラーは、ボディマウントを実現するため、シャーシ側に取り付けるカプラーポケットも付けました。 これがないとボディマウントは難しいです。</p>



<p class="wp-block-paragraph">そのほか、ホーンと手摺を植えてあげて下さい。 ライト部分は、直径1mmくらいの光ファイバーを使うといいかもしれません。 ナンバーボードは、塗装前に内側と外側をマスキング。 透明ボディを活かして、点灯させることができます。 後から気づいたのですが、ストロボ部分もマスキングしてあげればよかったなと後悔しています。<br /></p>



<figure class="wp-block-image size-large is-resized is-style-default"><img loading="lazy" decoding="async" src="https://railroad.tomhirano.com/wp-content/uploads/2022/10/e60ma-closeup-1024x682.jpg" alt="Closeup of E60MA (Shapeways shell)" class="wp-image-6163" width="768" height="512" srcset="https://railroad.tomhirano.com/wp-content/uploads/2022/10/e60ma-closeup-1024x682.jpg 1024w, https://railroad.tomhirano.com/wp-content/uploads/2022/10/e60ma-closeup-600x400.jpg 600w, https://railroad.tomhirano.com/wp-content/uploads/2022/10/e60ma-closeup-300x200.jpg 300w, https://railroad.tomhirano.com/wp-content/uploads/2022/10/e60ma-closeup-768x512.jpg 768w, https://railroad.tomhirano.com/wp-content/uploads/2022/10/e60ma-closeup-1140x759.jpg 1140w, https://railroad.tomhirano.com/wp-content/uploads/2022/10/e60ma-closeup.jpg 1201w" sizes="(max-width: 768px) 100vw, 768px" /><figcaption class="wp-element-caption">Closeup of E60MA (Shapeways shell)</figcaption></figure>



<p class="wp-block-paragraph">需要があるかわかりませんが、もしよろしければどうぞ ^^</p>


http://shpws.me/Tebo


<p class="wp-block-paragraph"></p>
<p>The post <a href="https://railroad.tomhirano.com/3d-printed-trains/e60ma-shapeways/">Shapewaysで E60MA 出力してみた</a> appeared first on <a href="https://railroad.tomhirano.com">Tom Hirano Trains</a>.</p>
]]></content:encoded>
					
		
		
			</item>
		<item>
		<title>自作ダミーカプラー</title>
		<link>https://railroad.tomhirano.com/3d-printed-trains/dummy-coupler/</link>
		
		<dc:creator><![CDATA[トム]]></dc:creator>
		<pubDate>Mon, 24 Oct 2022 15:41:23 +0000</pubDate>
				<category><![CDATA[3D造形模型ネタ]]></category>
		<category><![CDATA[N Scale]]></category>
		<category><![CDATA[鉄道模型]]></category>
		<guid isPermaLink="false">https://railroad.tomhirano.com/?p=6149</guid>

					<description><![CDATA[<p>自作車輌の難点 Nゲージ車両を自作していてよく困るのがカプラー。 特に海外の車輌は長めのものが多く、カーブ対策を考えると頭が痛い。 普段はMicro Trains製のナックルカプラーをボディ側にマウントしていますが、動力 [&#8230;]</p>
<p>The post <a href="https://railroad.tomhirano.com/3d-printed-trains/dummy-coupler/">自作ダミーカプラー</a> appeared first on <a href="https://railroad.tomhirano.com">Tom Hirano Trains</a>.</p>
]]></description>
										<content:encoded><![CDATA[
<h3 class="wp-block-heading">自作車輌の難点</h3>



<p class="wp-block-paragraph">Nゲージ車両を自作していてよく困るのがカプラー。 特に海外の車輌は長めのものが多く、カーブ対策を考えると頭が痛い。 普段は<a href="https://www.micro-trains.com/" target="_blank" rel="noreferrer noopener">Micro Trains</a>製のナックルカプラーをボディ側にマウントしていますが、動力車のようにボディマウント加工が難しい場合も。 運よく合うカプラーが見つかっても、長さがイマイチだったりうまくいかないことが多々。</p>



<h3 class="wp-block-heading">ダミーカプラーならいけるか？</h3>



<p class="wp-block-paragraph">マイクトロレインズのようなナックル機構のカプラーは難しいけど、ダミーカップラーなら作れるかも？ そう思い、市販のダミーカプラーを模して少し長めのカプラーを作ってみました。</p>



<h3 class="wp-block-heading">３Dでお絵描き</h3>



<p class="wp-block-paragraph">連結面の部分は、転がってたダミーカプラーを参考に設計。 反対側は、カプラーポケットの構造を意識しながらサイズを決定。 あとはフィッティングして微調整します。</p>



<figure class="wp-block-image size-full"><img loading="lazy" decoding="async" width="901" height="600" src="https://railroad.tomhirano.com/wp-content/uploads/2022/10/dummy-coupler-design.jpg" alt="" class="wp-image-6150" srcset="https://railroad.tomhirano.com/wp-content/uploads/2022/10/dummy-coupler-design.jpg 901w, https://railroad.tomhirano.com/wp-content/uploads/2022/10/dummy-coupler-design-600x400.jpg 600w, https://railroad.tomhirano.com/wp-content/uploads/2022/10/dummy-coupler-design-300x200.jpg 300w, https://railroad.tomhirano.com/wp-content/uploads/2022/10/dummy-coupler-design-768x511.jpg 768w" sizes="(max-width: 901px) 100vw, 901px" /></figure>



<h3 class="wp-block-heading">3D出力</h3>



<p class="wp-block-paragraph">いつも使ってるUVレジン3Dプリンターで出力。 他のパーツに混ぜて出力。 とりあえずカプラーポケットには無事収まった。 ダミーカプラーを取り付けた感じはこちら。</p>



<figure class="wp-block-image size-full"><img loading="lazy" decoding="async" width="900" height="599" src="https://railroad.tomhirano.com/wp-content/uploads/2022/10/printed-dummy-coupler.jpg" alt="" class="wp-image-6151" srcset="https://railroad.tomhirano.com/wp-content/uploads/2022/10/printed-dummy-coupler.jpg 900w, https://railroad.tomhirano.com/wp-content/uploads/2022/10/printed-dummy-coupler-600x399.jpg 600w, https://railroad.tomhirano.com/wp-content/uploads/2022/10/printed-dummy-coupler-300x200.jpg 300w, https://railroad.tomhirano.com/wp-content/uploads/2022/10/printed-dummy-coupler-768x511.jpg 768w" sizes="(max-width: 900px) 100vw, 900px" /></figure>



<p class="wp-block-paragraph">とりあえず大丈夫そう。 強度は？ですが、安いので予備出力しておけば問題ないかなと。 長さに関しては、データさえあれば車輌に合わせて簡単に変更・出力できるので便利ですね。 もっと早く気が付けばよかった（笑）</p>



<p class="wp-block-paragraph"></p>
<p>The post <a href="https://railroad.tomhirano.com/3d-printed-trains/dummy-coupler/">自作ダミーカプラー</a> appeared first on <a href="https://railroad.tomhirano.com">Tom Hirano Trains</a>.</p>
]]></content:encoded>
					
		
		
			</item>
	</channel>
</rss>
